X1 Carbon Gen 9 and X1 Yoga Gen 6 User Guide
Read this first Before using this documentation and the product it supports, ensure that you read and understand the following: • Safety and Warranty Guide • Setup Guide • Generic Safety and Compliance Notices First Edition (February 2021) © Copyright Lenovo 2021. LIMITED AND RESTRICTED RIGHTS NOTICE: If data or software is delivered pursuant to a General Services Administration “GSA” contract, use, reproduction, or disclosure is subject to restrictions set forth in Contract No. GS35F-05925.
&RQWHQWV Discover your Lenovo notebook. . . . . iii Chapter 1. Meet your computer . . . . . 1 Front view . . . . . . Side view . . . . . . Bottom view . . . . . Specifications . . . . USB specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 5 6 6 6 Protect your privacy (for selected models) . . Protect data against power loss (for selected models) . . . . . . . . . . . . . . . . UEFI BIOS passwords . . . . .
Appendix B. Compliance information . . . . . . . . . . . . . . . 55 ii X1 Carbon Gen 9 and X1 Yoga Gen 6User Guide Appendix C. Notices and trademarks . . . . . . . . . . . . . . .
Discover your Lenovo notebook Thank you for choosing a Lenovo notebook! We are dedicated to delivering the best solution to you. Before starting your tour, please read the following information: • Illustrations in this documentation might look different from your product. • Depending on the model, some optional accessories, features, software programs, and user interface instructions might not be applicable to your computer. • Documentation content is subject to change without notice.
iv X1 Carbon Gen 9 and X1 Yoga Gen 6User Guide
Chapter 1.
NFC (near field communication) mark* Trackpad TrackPoint buttons Touch screen * for selected models Privacy shutter Slide Privacy shutter to cover or uncover the camera lens. It is designed to protect your privacy.
ThinkPad X1 Carbon Gen 9 IR camera* / Camera* Privacy Shutter (Camera cover) Microphones Power button with fingerprint reader TrackPoint® pointing stick Speaker NFC (near field communication) mark* Trackpad TrackPoint buttons Touch screen* * for selected models Chapter 1.
ThinkShutter Slide Privacy Shutter to cover or uncover the camera lens. It is designed to protect your privacy.
Side view Power connector Thunderboltറ 4 connector (USB-C®) Always on USB 3.
Bottom view Emergency-reset hole Speaker Emergency-reset hole If the computer stops responding and you cannot turn it off by pressing the power button, reset your computer: 1. Disconnect your computer from ac power. 2. Insert a straightened paper clip into the hole to cut off power supply temporarily. 3. Connect your computer to ac power and then turn on your computer. Specifications For detailed specifications of your computer, go to https://psref.lenovo.com.
Connector name Description Connect USB-compatible devices, such as a USB keyboard, USB mouse, USB storage device, or USB printer. • USB 2.0 connector • USB 3.2 connector Gen 1 • Charge USB-C compatible devices with the output voltage and current of 5 V and 1.5 A. • Connect to an external display: – USB-C to VGA: up to 1920 x 1200 pixels, 60 Hz – USB-C to DP: up to 5120 x 3200 pixels, 60 Hz • USB-C (3.2 Gen 1) connector • USB-C (3.
8 X1 Carbon Gen 9 and X1 Yoga Gen 6User Guide
Chapter 2. Get started with your computer Access networks This section helps you connect to a wireless or wired network. Connect to Wi-Fi networks Click the network icon in the Windows® notification area, and then select a network for connection. Provide required information, if needed. Connect to the wired Ethernet To connect your computer to a local network, you need a Lenovo USB-C to Ethernet Adapter. Lenovo USBC to Ethernet Adapter is available as an option and shipped with some computer models.
Note: The cellular service is provided by authorized mobile service carriers in some countries or regions. You must have a cellular plan from a service carrier to connect to the cellular network. To establish a cellular connection: 1. Turn off the computer. 2. Turn over the computer to prevent nano-SIM card from falling. 3. Locate the nano-SIM card slot and insert the nano-SIM card as shown. Note the orientation of the card and ensure that it is seated correctly. 4. Turn over the computer and turn it on.
Enable / disable microphones Darken display Brighten display Manage external displays Enable / disable airplane mode Open / collapse notification center Answer incoming calls This function only works with some apps, such as Skype for Business 2016 and Microsoft Teams 1.0. By default, the function works with Skype for Business 2016. You can change the default setting on the Vantage app. Decline incoming calls This function only works with some apps, such as Skype for Business 2016 and Microsoft Teams 1.0.
Go to beginning + Go to end + Use the TrackPoint pointing device The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as pointing, clicking, and scrolling. Use the TrackPoint pointing device TrackPoint pointing stick Use your finger to apply pressure to the pointing-stick nonslip cap in any direction parallel to the keyboard. The pointer on the screen moves accordingly. The higher the pressure applied, the faster the pointer moves.
Replace the pointing-stick nonslip cap Note: Ensure that the new cap has grooves D . Use the trackpad You can use the trackpad to perform all the pointing, clicking, and scrolling functions of a traditional mouse. Use the trackpad Left-click zone Right-click zone Chapter 2.
Use the touch gestures Tap once to select or open an item. Tap twice quickly to display a shortcut menu. Two-finger zoom in or zoom out. Scroll through items. Open the task view to see all open windows. Show the desktop. Notes: • When using two or more fingers, ensure that you position your fingers slightly apart. • Some gestures are not available if the last action was done from the TrackPoint pointing device. • Some gestures are only available when you are using certain apps.
Tap once to single click Tap twice quickly to double-click Tap and hold to right-click Slide to scroll through items Zoom out Zoom in Swipe from the right: open action center Swipe from the left: view all open windows Drag Swipe downwards shortly: show title bar Swipe downwards: close the current app Chapter 2.
Maintenance tips: • Turn off the computer before cleaning the touch screen. • Use a dry, soft, and lint-free cloth or a piece of absorbent cotton to remove fingerprints or dust from the touch screen. Do not apply solvents to the cloth. • The touch screen is a glass panel covered with a plastic film. Do not apply pressure or place any metallic object on the screen, which might damage the touch panel or cause it to malfunction.
Change display settings 1. Right-click a blank area on the desktop and select Display settings. 2. Select the display that you want to configure. 3. Change display settings of your preference. You can change the settings for both the computer display and the external display. For example, you can define which one is the main display and which one is the secondary display. You also can change the resolution and orientation.
Notebook mode Stand mode Tent mode Tablet mode Use Lenovo Integrated Pen (for ThinkPad X1 Yoga Gen 6 only) The garaged rechargeable electronic Lenovo Integrated Pen enables a more precise and easier way of writing and sketching. Eraser button Right-click button Lneovo Integrated Pen is not waterproof. Keep the pen away from water and excessive moisture. To purchase Lenovo Integrated Pen, go to https://www.lenovo.com/accessories.
Charge Lenovo Integrated Pen 1. Ensure that your computer is on or in sleep mode. 2. Insert the pen back into the pen slot. The pen is 80% charged in about 15 seconds and 100% charged in about five minutes. Chapter 2.
20 X1 Carbon Gen 9 and X1 Yoga Gen 6User Guide
Chapter 3. Explore your computer Lenovo apps This section provides introduction to the Vantage and Lenovo Quick Clean apps. The Vantage app The preinstalled Vantage app is a customized one-stop solution to help you maintain your computer with automated updates and fixes, configure hardware settings, and get personalized support. To access the Vantage app, type 9DQWDJH in the search box. Key features The Vantage app enables you to: • Know the device status easily and customize device settings.
Access Glance by Mirametrix • Open the Start menu and click Glance by Mirametrix. • Use Windows Search. Note: If Glance is uninstalled, you can request it through https://support.lenovo.com/contactus for applicable system. Explore key features Depending on the model, some features might not be available on your computer. • Protect privacy – Presence Detection: Keep your computer awake when in use and automatically lock the computer when your head moves out of the camera range.
• Promote digital wellness – Posture check: Remind you if you hunch toward the screen while using the computer. – 20/20/20 Alert: Remind you to look away from the screen for 20 seconds every 20 minutes. Intelligent cooling The Intelligent Cooling feature helps you adjust fan speed, computer temperature and performance. This feature works in auto mode by default. Press Fn+T to switch between manual mode and auto mode.
Manage power Use the information in this section to achieve the best balance between performance and power efficiency. Check the battery status Click the battery icon in the Windows notification area to check the battery status, view the current power plan, change the power mode, and access battery settings quickly. For more details about your battery, refer to the Vantage app.
Use P-to-P 2.0 (Peer to Peer 2.0) charging function Both Thunderbolt 4 connectors (USB-C) on the computer feature the Lenovo-unique P-to-P 2.0 charging function. To use the function, ensure that Always On USB and Charge in Battery Mode are enabled in UEFI BIOS of your computers, so that the function works even when the computers are off or in hibernation mode. To enable Always On USB and Charge in Battery Mode: 1. Press F1 to enter the UEFI BIOS menu. 2.
Transfer data Quickly share your files using the built-in Bluetooth or NFC technology among devices with the same features. Set up a Bluetooth connection You can connect all types of Bluetooth-enabled devices to your computer, such as a keyboard, a mouse, a smartphone, or speakers. To ensure successful connection, place the devices at most 10 meters (33 feet) from the computer. 1. Click the action center icon in the Windows notification area, and enable the Bluetooth feature. 2.
Purchase accessories Lenovo has a number of hardware accessories and upgrades to help expand the functionalities of your computer. Options include memory modules, storage devices, network cards, port replicators or docking stations, batteries, power adapters, keyboards, mice, and more. To shop at Lenovo, go to https://www.lenovo.com/accessories. Chapter 3.
28 X1 Carbon Gen 9 and X1 Yoga Gen 6User Guide
Chapter 4. Secure your computer and information Lock the computer Lock your computer to a desk, table, or other fixtures through a compatible security cable lock. Note: The slot supports cable locks that conform to the Kensington NanoSaver® lock standards using Cleatറ locking technology. You are responsible for evaluating, selecting, and implementing the locking device and security feature. Lenovo is not responsible for the locking device and security feature.
• Do not scratch the surface of the reader with anything hard. • Do not use or touch the reader with a wet, dirty, wrinkled, or injured finger. Log in with your face ID (for selected models) Create your face ID and unlock your computer by scanning your face: 1. Open the Start menu and click Settings ᇆ Accounts ᇆ Sign-in options. 2. Locate the Password section and click Add to create a password. 3. Locate the Windows Hello Face section and click Set up under Face Recognition. Then, click Get Started.
• If the Airplane mode is enabled, human presence detection is disabled. • Your computer uses a human presence sensor to detect your presence and the IR camera to recognize your face. Lenovo does not collect any personal data. For some countries or regions, the human presence sensor is disabled according to local regulations. Protect your privacy (for selected models) Use the ePrivacy screen Your computer might come with an ePrivacy screen.
Power-on password If you set a power-on password, a window is displayed on the screen when you turn on the computer. Enter the correct password to use the computer. Supervisor password The supervisor password protects the system information stored in UEFI BIOS. When entering the UEFI BIOS menu, enter the correct supervisor password in the window prompted. You also can press Enter to skip the password prompt. However, you cannot change most of the system configuration options in UEFI BIOS.
• An eDrive storage drive is installed in the computer preinstalled with the Windows 10 operating system. Set, change, or remove a password Before you start, print these instructions. 1. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu. 2. Select Security ᇆ Password by using the arrow keys. 3. Select the password type. Then, follow the on-screen instructions to set, change, or remove a password.
What to do if you forget your supervisor password If you forget your supervisor password, there is no service procedure to remove the password. You can contact a Lenovo authorized service provider to have the system board replaced. A fee will be charged for parts and service. Associate your fingerprints with passwords (for selected models) Do the following to associate your fingerprints with the power-on password and hard disk password: 1. Turn off and then turn on the computer. 2.
Chapter 5. Configure advanced settings UEFI BIOS UEFI BIOS is the first program that the computer runs. When the computer turns on, UEFI BIOS performs a self test to make sure that various devices in the computer are functioning. Enter the UEFI BIOS menu Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu.
Download and install the latest UEFI BIOS update package by one of the following methods: • Open the Vantage app to check the available update packages. If the latest UEFI BIOS update package is available, follow the on-screen instructions to download and install the package. • Go to https://pcsupport.lenovo.com and select the entry for your computer. Then, follow the on-screen instructions to download and install the latest UEFI BIOS update package.
After two consecutive failed boot attempts, the Windows recovery environment starts automatically. Then you can choose repair and recovery options by following the on-screen instructions. To know more about recovery information, visit Knowledge Base of your computer at https:// pcsupport.lenovo.com. Create and use a recovery USB device It is recommended that you create a recovery USB drive as early as possible as a backup for the Windows recovery programs.
1. If you are using the Windows BitLocker Drive Encryption feature and your computer has a Trusted Platform Module, ensure that you have disabled the feature. 2. Ensure that the security chip is set to Active. a. Restart the computer. When the logo screen is displayed, press F1 to enter the UEFI BIOS menu. b. Select Security ᇆ Security Chip and press Enter. The Security Chip submenu opens. c. Ensure that the security chip for TPM 2.0 is set to Active. d. Press F10 to save the settings and exit. 3.
Chapter 6. CRU replacement Customer Replaceable Units (CRUs) are parts that can be upgraded or replaced by the customer. The computers contain the following types of CRUs: • Self-service CRUs: Refer to parts that can be installed or replaced easily by customer themselves or by trained service technicians at an additional cost. • Optional-service CRUs: Refer to parts that can be installed or replaced by customers with a greater skill level.
2. Select Config ᇆ Power. The Power submenu is displayed. 3. Select Disable Built-in Battery and press Enter. 4. Select Yes in the Setup Confirmation window. The built-in battery is disabled and the computer turns off automatically. Wait three to five minutes to let the computer cool. Replace a CRU Follow the replacement procedure to replace a CRU. Base cover assembly Prerequisite Before you start, read Generic Safety and Compliance Notices and print the following instructions.
Installation procedure Troubleshooting If the computer does not start up after you reinstall the base cover assembly, disconnect the ac power adapter and then reconnect it to the computer. 2242 M.2 solid-state drive Prerequisite Before you start, read Generic Safety and Compliance Notices and print the following instructions. Attention: If you replace a 2242 M.2 solid-state drive, you might need to install a new operating system.
Removal procedure 42 X1 Carbon Gen 9 and X1 Yoga Gen 6User Guide
Chapter 7. Help and support Frequently asked questions How do I access Control Panel? • Open the Start menu and click Windows System ᇆ Control Panel. • Use Windows Search. How do I turn off my computer? Open the Start menu and click How do I partition my storage drive? https://support.lenovo.com/solutions/ht503851 Power. Then, click Shut down. 1. Press and hold the power button until the computer turns off. Then, restart the computer. 2.
Error messages If you see a message that is not included in the following table, record the error message first, then shut down the computer and call Lenovo for help. See “Lenovo Customer Support Center” on page 48. Message Solution 0190: Critical low-battery error The computer turned off because the battery power is low. Connect the ac power adapter to the computer and charge the batteries. 0191: System Security - Invalid remote change requested The system configuration change has failed.
Beep errors Lenovo SmartBeep technology enables you to decode beep errors with your smartphone when a black screen occurs with beeps from your computer. To decode the beep error with Lenovo SmartBeep technology: 1. Go to https://support.lenovo.com/smartbeep or scan the following QR Code. 2. Download the proper diagnostic app and install it on your smartphone. 3. Run the diagnostic app and place the smartphone near the computer. 4. Press Fn on your computer to emit the beep again.
Self-help resources Use the following self-help resources to learn more about the computer and troubleshoot problems. Resources How to access? Use the Vantage app to: • Configure device settings. • Download and install UEFI BIOS, drivers, and firmware updates. • Secure your computer from outside threats. • Diagnose hardware problems. Type 9DQWDJH in the search box. • Check the computer warranty status. • Access User Guide and helpful articles.
• In the People’s Republic of China, the Genuine Microsoft label is required on all computer models preinstalled with any version of Windows 10. • In other countries and regions, the Genuine Microsoft label is required only on computer models licensed for Windows 10 Pro. The absence of a Genuine Microsoft label does not indicate that the preinstalled Windows version is not genuine.
Lenovo Customer Support Center During the warranty period, you can call Lenovo Customer Support Center for help. Telephone numbers For a list of the Lenovo Support phone numbers for your country or region, go to https:// pcsupport.lenovo.com/supportphonelist for the latest phone numbers. Note: Phone numbers are subject to change without notice. If the number for your country or region is not provided, contact your Lenovo reseller or Lenovo marketing representative.
• https://pcsupport.lenovo.com/warrantylookup Purchase additional services During and after the warranty period, you can purchase additional services from Lenovo at https:// www.lenovo.com/services. Service availability and service name might vary by country or region. Chapter 7.
50 X1 Carbon Gen 9 and X1 Yoga Gen 6User Guide
Appendix A. Accessibility and ergonomic information This chapter provides information about accessibility and ergonomics. Accessibility information Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater access to information and technology. This section provides information about the ways these users can get the most out of their computer experience. You also can get the most up-to-date accessibility information from the following Web site: https://www.
keyboard with all the standard keys. You can select keys using the mouse or another pointing device, or you can tap to select the keys if your computer supports multi-touch screen. • High Contrast High Contrast is a feature that heightens the color contrast of some text and images on your screen. As a result, those items are more distinct and easier to identify. • Personalized keyboard Adjust keyboard settings to make your keyboard easier to use.
– Change the size of all the items on your screen. 1. Right-click a blank area on the desktop and then click Display settings ᇆ Display. 2. Change the item size by following the on-screen instructions. For some applications, your configuration might not take effect until you sign out and then sign in again. – Change the size of the items on a Web page. Press and hold Ctrl, and then press the plus-sign key (+) to enlarge or the minus-sign key (–) to reduce the text size.
Display: Position the display to maintain a comfortable viewing distance of 510 mm to 760 mm (20 inches to 30 inches). Avoid glare or reflections on the display from overhead lighting or outside sources of light. Keep the display screen clean and set the brightness to levels that enable you to see the screen clearly. Press the brightness control keys to adjust display brightness. Head position: Keep your head and neck in a comfortable and neutral (vertical, or upright) position.
Appendix B. Compliance information Note: For more compliance information, refer to Generic Safety and Compliance Notices and Regulatory Notice at https://pcsupport.lenovo.com.
The following illustration shows the antenna locations on ThinkPad X1 Yoga Gen 6: Wireless LAN antenna (auxiliary) Wireless LAN antenna (main) Wireless WAN antenna* (MIMO1) Wireless WAN antenna* (main) Wireless WAN antenna* (auxiliary) Wireless WAN antenna* (MIMO2) * for selected models 56 X1 Carbon Gen 9 and X1 Yoga Gen 6User Guide
The following illustration shows the antenna locations on ThinkPad X1 Carbon Gen 9: Wireless LAN antenna (main and auxiliary) Wireless WAN antenna (MIMO1)* Wireless WAN antenna (main)* Wireless WAN antenna (auxiliary)* Wireless WAN antenna (MIMO2)* * for selected models Federal Communications Commission (FCC) Supplier’s Declaration of Conformity The following information refers to products below: Product name Machine types ThinPad X1 Yoga Gen 6 20XY and 20Y0 ThinkPad X1 Carbon Gen 9
Lenovo is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules.
Relative humidity • Operating: 8% to 95% at wet-bulb temperature 23°C (73°F) • Storage and transportation: 5% to 95% at wet-bulb temperature 27°C (81°F) Regulatory labels Depending on your country or region, you can find the government-required regulatory information through one of the following methods: • On a physical label attached to the outside of your computer shipping carton • On a physical label attached to your computer • Through an electronic-label screen (E-label screen) preinstalled on your com
60 X1 Carbon Gen 9 and X1 Yoga Gen 6User Guide
Appendix C. Notices and trademarks Notices Lenovo may not offer the products, services, or features discussed in this document in all countries. Consult your local Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used.
Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary.
