User's Guide

• Recording from various sound sources, such as a headset attached
The following list provides information about supported functions of the audio devices attached to the
connectors on your computer or the docking station.
• Headset with a 3.5-mm (0.14-inch), 4-pole plug: Headphone and microphone functions
• Conventional headphone: Headphone function
Note: The conventional microphone is not supported.
Using the cameras
Your computer might be equipped with two conventional cameras, a front camera and a rear camera. You
can use the conventional cameras to take pictures and record videos.
To start the camera, open the Start menu, and tap Camera. When the camera starts, the green camera-in-
use indicator turns on.
You can configure the camera settings to meet your needs, such as adjusting the video output quality. To
configure the camera settings, do one of the following:
• Open the Camera app, and click the settings icon in the upper-right corner. Follow the instructions on the
screen to configure the camera settings.
• Open the Start menu and click Lenovo Companion ᇆHardware Settings ᇆDisplay, Camera & Audio/
Media. Locate the Camera section and then follow the instructions on the screen to configure the camera
settings.
Using a media card
Your computer has one media-card slot.
The media-card slot supports the following types of cards:
Note: Your computer does not support the content protection for recordable media (CPRM) feature for the
SD card.
• MultiMediaCard (MMC)
• Secure Digital (SD) card
• Secure Digital eXtended-Capacity (SDXC) card
• Secure Digital High-Capacity (SDHC) card
Attention: When transferring data to or from a media card, such as an SD card, do not put your computer to
sleep or hibernation mode before the data transfer is completed. Otherwise, your data could get damaged.
Installing a media card
To install a media card, do the following:
1. Locate the appropriate type of slot for your card. See “Computer controls, connectors, and indicators”
on page 1.
2. Ensure that the metal contacts are facing down and toward the card slot.
3. Press the card firmly into the card slot.
If the plug-and-play feature is not enabled, do the following:
1. Go to Control Panel.
Chapter 2. Using your computer 31