Datasheet

4
15. Connect the power cable (A) to the connector on the backplane.
16. Connect the SCSI cable (B) to the server board. You may also connect it to a PCI card.
If you connect it to the server board or a low profile PCI card, route the cable between
the chassis and the fan module as shown. If you connect it to a full height PCI card,
route the cable along the bottom of the fan module.
OM14662
BA
Figure 6. Connecting Cables to the Server Board
17. Install and connect the fan module.
18. Install the processor duct.
19. Connect the Flex circuit cable to the backplane.
20. Install the chassis cover.