User Manual
Table Of Contents
- Overview
- Setting Up the Gateway on a Network
- Changing the Gateway Settings
- Using the Advanced Feature Set
- Accessing advanced features
- Changing your gateway password
- Changing your advanced wireless settings
- Setting your transfer rate
- Setting your operating channel
- Using system tools
- Establishing routing protocols
- Refining DHCP server addressing
- Assigning virtual server settings
- Using access control features
- Changing your gateway IP address
- IP addressing in network adapters
- Universal Plug and Play
- Troubleshooting
- Glossary
- Glossary
- 802.11b
- Ad Hoc Mode
- Adapter
- Access Point (AP)
- ASCII characters
- DHCP
- Driver (Device Driver)
- DNS
- Encryption
- Ethernet
- Ethernet address (MAC address)
- Firewall
- Gateway
- Hexadecimal
- Hub
- Infrastructure Mode
- IEEE
- ISP
- LAN
- Mbps
- NAT
- Peer-to-Peer Mode
- Profiles (Network Profiles)
- Protocols (Network Protocols)
- Resources (Network resources)
- Roaming
- SSID
- Subnet
- Subnet mask
- Switch
- TCP/IP
- UPnP
- USB
- VPN
- Glossary
- Specifications
- Regulatory Compliance Statements
- Index
Index
92
R
Range 4
Resetting and restarting gateway
73
Routing information
43
Routing protocols 43
S
Save and restart 37
Service requirements
5
Setup wizard
23
Specifications
83
SSID, defined
79
SSID, see Network Name
27
System requirements
4
System tools 42, 71
T
Transfer rate 42
Troubleshooting information, where to find
12
Troubleshooting tips
71
U
Upgrading firmware 72
UPnP 53
UPnP, defined
81
UPnP, disabling
53
V
Viewing
Connection status
25
default settings
25
Virtual Server settings
46
W
WEP (see Network Encryption) 77
Wired Equivalent Privacy (see Network
Encryption)
77
Wireless settings
9, 26
Wizard, setup 23
user_guide_rg1210.book Page 92 Monday, April 22, 2002 2:20 PM