User's Guide

11.6" Rugged Tablet M116P/ PT Series User Guide

Problem

Solution

No sound is produced.

• Adjust volume of the tablet computer by pressing on

the volume rocker.

• If using an external audio device, make sure that the

cable is properly connected.

I cannot project the tablet computer

display to another monitor.

• Make sure the VGA driver is installed.

• Make sure the output setting selected is correct.

Barcode scanner does not emit laser

beam and does not seem to work.

• Make sure the Barcode scanner device is enabled in

Hottab utility.

• Make sure under Windows, the Barcode Reader is set

to COM 15 port, so that Hottab can trigger the

Barcode Reader hardware.

Barcode Scanner emits laser beam

but does not read barcode

presented to it.

• Adjust the distance between barcode scanner of the

device and the barcode being scanned.

• Make sure the barcode code type is enabled in the

tablet. To enable/disable a specific barcode code type,

go through the “Barcode Scanner Configuration”

section.

I am having GPS accuracy issue

• When utilizing the GPS function, we recommend

disabling the Barcode Reader in Hottab to reduce

interference.

RFID scanner does not seem to

work.

• Make sure under Windows, the RFID hardware is set

to COM 3 port.

Battery leaking or swollen

• The lithium battery used in this tablet may swell after

being charged/ discharged many times, but there is no

problem regarding safety.

• Continued use in such a state may result in the battery

getting jammed, so please stop using the battery, and

purchase a new one.