User's Guide

Chapter 5: Frequently Used Settings

8. Next, the user has to configure the application that is used to accept the scanned data from the

wireless Bluetooth Barcode Scanner. The application has to be configured to accept the same

COM Port that has been assigned for the Bluetooth Serial Port Profile in the previous step.

Important:Make sure the application stays open while pairing.

9. Now the computer is ready for pairing process to start

5.7.2 Set up the Barcode Scanner for Bluetooth Pairing

Now the Barcode Scanner is ready for pairing process to start.

5.7.3 Perform Bluetooth Pairing

After you finish setting up both the Computer and Barcode Scanner you are ready to start

pairing.

1. Open aprogram that is used for paring.

2. Perform scanning procedures. A Bluetooth notification window pop-up on the right hand

side of the desktop. Left click on the mouse to enter Add a device menu.

3. Locate the Bluetooth icon in the Notification Area.

4. Click Add Bluetooth Device.

ImportantThe wireless Bluetooth Barcode Scanner has to be configured as Bluetooth

Serial Port Profile Master device to establish connection via Bluetooth MAC address

barcode label. For a more detailed instruction, please refer to the User Guide for the

wireless Bluetooth Barcode Scanner you are using for paring.