User's Guide

47
11.6" Rugged Tablet M116P/ PT Series User Guide
To remove the battery pack:
1. Shut down the tablet (or put into sleep mode). Turn the tablet computer over, back facing up.
2. Pushthe Battery Lock Latch it to the “Unlocked” position.
3. Pull up and holdthe Battery Release Slider that is spring-loaded.
4. Lift the battery out using the opening on the side of battery compartment.
5.3 Using Recovery Wizard to Restore Computer
M116P/ PT Series Rugged Tablet has a dedicate recovery partition stored on the hard drive of the tablet
to enable quick one-key recovery process. This partition occupies about 11GB of the storage space, and
comes built-in to each M116P/ PT Series Rugged Tablet.
Warning!Before starting the recovery process, be sure to backup all user data, as all
data will be lost after the recovery process.
Attention! Avant de démarrer le processus de récupération, assurez-vous de
sauvegarder toutes les données utilisateur, car toutes les données seront perdues après
le processus de récupération.
Follow the procedure below to enable quick one-key recovery:
1. Plug-in the AC adapter to the tablet computer. Make sure the tablet computer stays plugged in to
power source during the recovery process.
2. Power on the tablet computer, and when the boot screen shows up, press the Fn1 button
(Recovery Key) on the front bezel OR press F6when using an external USB keyboard to initiate
the Recovery Wizard.
3. The following screen shows the Recovery Wizard. Click on “Recovery” button to continue.