User's Guide

38
Chapter 4: Operating the Device
Caution
Do not open when the expansion port is not used
To enable the add-on module from expansion port:
1. Open the Hottab utility by press the (Menu) Button located on the front panel, OR launching the
Hottab Utility application.
2. Tap on the Device ON/OFF button.
3. Check the status color of theExt. Module icon:
Item
Status Color
Description
Ext. Module
Orange
Expansion Module is enabled.
White
Ext. Module is disabled.
4.4.11 UHF RFID Reader Module
The UHF RFID Reader is optional for M116P/ PT Series Rugged Tablet.
Note:
Download the SDK from Winmate Download center.
>>M116P>>Development Kit or check the Driver CD which is shipped with the tablet.
4.4.11.1 How to Install
1. Remove expansion port cover from the rear side of Tablet PC.
2. Remove the top two screws of the I/O cover.
3. Align the pogo pin on UHF RFID module to the expansion port of Tablet PC; screw to fix the
module on tablet.