User's Guide

37
11.6" Rugged Tablet M116P/ PT Series User Guide
1. Launch the HottabUtility .
2. Tap on the Setting button.
3. Tap on F1 icon.
4. Tap on the Long Press icon.
5. Change the Long Press function to “Touch Mode” as
shown below:
Once the touchscreen mode switching is set to the programmable function button, Long Press on “F1”
function button to cycle through the different touchscreen modes. When touchscreen mode is switched,
an icon will temporarily overlay on the lower center of the screen to indicate current touchscreen mode:
4.4.10Using the Expansion Module
The Expansion Port is optional for M116P/ PT Series Rugged Tablet and is not re-workable by the end
user. To work with Add-on module, please make sure the tablet PC is built-in expansion port before use,
or contact our sales contact window for more details.
The Ext. Module function allows users to choose either UHF RFID Reader or Smart Card Reader.