User's Guide

36
Chapter 4: Operating the Device
4.4.9ChangingTouchscreen Modes
The tablet computer supports three built-in operating modes for different usage scenarios:
Mode
Description
Hand/Rain (Default)
In Hand/Rain mode the touchscreen rejects false inputs from liquid drops. When
the liquid is removed, the touchscreen accepts touch inputs from bare fingertips.
Supportsinput by:
 Active stylus with palm rejection
 Rubber tip passive stylus
 Bare fingertips
Stylus
In Stylus mode, the touchscreen supports inputs from the fine-tip passive
capacitive stylus (shipped with tablet).
Support input by:
 Fine-tip passive stylus with palm rejection
 Active stylus with palm rejection
 Rubber tip passive stylus
 Bare fingertips
Glove
In Glove mode, the touchscreen supports inputs while the user is operating the
touchscreen with gloves on.
Supports input by:
 Glove
 Rubber tip passive stylus
 Bare fingertips
To change touch mode:
Launch the Hottab Utility .Choose “Device ON/OFF,and then click “Touch Set” icon. ➔ ➔
4.4.9.1 Switch via Built-in HotTab Utility
To switch touchscreen mode via the HotTab:
1. Launch the HottabUtility .
2. Choose “Device ON/OFF”and then click on
“Touch Set” icon ➔
3. Under the “Touch Mode”, select the desired
touch modes by tapping on the radio button.
4. Here’s also additional Touch related setting to
switch the touchscreen input between mouse
mode with cursor, or with multi-touch mode:
Mouse Mode:Single touch point supported,
with mouse cursor shown.
Multi-touch Mode:The default setting of the
touch screen supports multi-touch mode (up to
10 points)
4.4.9.2 Switch via Programmable Function Buttons:
To switch between the different touchscreen modes via the programmable function buttons, make sure
the touchscreen mode switching is set to the programmable function buttons first.