User's Guide

35
11.6" Rugged Tablet M116P/ PT Series User Guide
Note:
User can download the SDK from Winmate Download center website
>>M116P>>Development Kit or check the Driver CD which is
shipped with the tablet.
4.4.7.3 RFID Output Setting
I
Select
RFID
Output
Type
The default setting for built-in HF RFID Reader is to Read UID. For some
applications, user might need to read or write further block data; the drop-down
menu under this section can do this change.
Disconnect
User can tap on the Disconnect button to stop the connection with built-in HF RFID
reader.
*To recover the connection, please turn off the module from setting UI and then turn
on the module again.
4.4.8 Turn on/off the Light Sensor
The Light Sensor can be turned on/off from Hottab menu. To enable/disable the Light Sensor, perform
the following procedure:
1. Launch the HottabUtility .
2. Tap on the Device ON/OFF button.
3. Check the status color of the Light Sensor icon:
Item
Status Color
Description
Light Sensor
Orange
Light Sensor is enabled.
White
Light Sensor is disabled.