User's Guide

24
Chapter 4: Operating the Device
4.4.5TurningOn/OffLED Indicators
The LED Indicators for Power Status, Battery Status, and RF Communication can be turned on/off from
Hottab menu.
To enable/disable the LED indicators:
1. Launch the HottabUtility .
2. Tap on the Device ON/OFF button.
3. Check the status color of the Indicator icon:
Item
Status Color
Description
Indicator
Orange
LED indicator is enabled.
White
LED indicator is disabled.
4. If the indicator is disabled (white), tap on the Indicator icon to enable it (orange).
4.4.6 Using the Barcode Reader
The 2D/1D Barcode Reader is optional for M116P/ PT Series Rugged Tablet and is not re-workable by
the end user. To use this feature, please make sure the tablet PC is built-in barcode reader before use,
or contact our sales contact window for more details.
Note:
Download the SDK from Winmate Download center here.
>>M116P>>Development Kit or check the Driver CD which is shipped with the
tablet.
To enable the Barcode Reader:
1. Launch the HottabUtility .
2. Tap on theDevice ON/OFFbutton.
3. Check the status color of the Barcode icon.
Item
Status Color
Description
Barcode
Orange
Barcode Reader is enabled. Reading will need to be
triggered manually thru function button.
White
Barcode Reader is disabled.
4. Open the application where barcode reader will be displaying the scanned barcode.
5. Trigger the barcode reader by pressingF2 function key (function key is programmable and can vary
based on your settings).
Tap Disconnect button to stop the connection with Barcode Reader.
*To recover the connection, please tap on the button again to re-connect with Barcode Reader.