User's Guide

14
Chapter 2: Getting Started
To remove the battery pack:
1. Shut down the tablet (or put into sleep mode). Turn the tablet computer over, back facing up.
2. Pushthe Battery Lock Latch it to the “Unlocked” position.
3. Pull up and holdthe Battery Release Slider that is spring-loaded.
4. Lift the battery out using the opening on the side of battery compartment.
2.6.3 Charging Your Tablet
The Tablet operates either on external AC power or internal battery power. It is recommended to use AC
power when you start up the Tablet for the first time.
CautionUse only the AC adapter included with your Tablet Computer. Using other AC
adapters may damage the Tablet Computer and the Battery.
AttentionUtilisez uniquement l'adaptateur secteur fourni avec votre ordinatrice
tablette. L'utilisation d'autres adaptateurs secteur peut endommager la tablette tactile et
la batterie.
To connect a tablet to AC power:
1. Open I/O protective cover by pulling out the latch.
2. Plug the DC cord of the AC adapter into the power jack of the tablet computer.
3. Plug the AC power cord into the AC adapter.
4. Plug the AC power cord into the electrical outlet.
The battery LED indicator shows different battery states:
Orange- AC adapter is plugged in and battery is charging.
Green- AC adapter is plugged in and battery is fully charged.
Solid Red- Low battery level (<10%).
Blinking Red – Battery is being hot swapped.
No light – Battery is in use and charged (>10%).