User's Guide

13
11.6" Rugged Tablet M116P/ PT Series User Guide
2.6.1 Installing a Micro SD Card
Your tablet supports additional storage with an optional micro SDXC card.
To install Micro SDXC Card:
1. Open I/O protective cover by pulling out the latch.
2. Insert micro SDXC card into slot with contacts facing down.
3. Press the card in to ensure that it is seated properly.
4. Close I/O protective cover.
To remove Micro SD Card:
1. Open I/O protective cover by pulling out the latch.
2. Push and release the micro SD card tounlock it.
3. Pull out the micro SD card.
2.6.2 Installing Battery
Caution Disconnect any cords connected to the tablet computer before installation or
removing battery procedure.
AttentionDébranchez tous les cordons connectés à la tablette avant l'installation ou la
procédure de retrait de la batterie.
To install the standard battery pack:
1. Turn the tablet over, back facing up.
2. Insert the battery with the connector-pins side first, and then lower the battery into the battery
compartment.Make sure the battery is completely lowered into the compartment. Once fully
inserted, the Battery Release Slider automatically locks. Battery will be flat against the housing
once fully inserted.
3. Push the Battery Lock to the “Locked” position.