Operator's Manual
Table Of Contents
- 1. Introduction
- 1.1. Introduction
- 1.2. Safety Information
- 1.3. Device Description
- 1.4. Intended Purpose
- 1.5. BIS™ Advance Monitor System Indications and Contraindications
- 1.6. Patient Target Groups
- 1.7. Intended Users
- 1.8. Essential Performance
- 1.9. Adverse Events (Residual Risks)
- 1.10. The BIS™ Advance Parameters
- 1.11. Symbols
- 2. The BIS™ Advance Monitor — Equipment and Supplies
- 2.1. The BIS™ Advance System
- 2.2. Parts of the System
- 3. Installation and Preparation for Use
- 3.1. Operating Environment
- 3.2. Power Requirements and Battery Use
- 3.3. Battery Operation
- 3.4. Mounting the Docking Station
- 3.5. Preparing the Docking Station
- 3.6. Preparing the Monitor
- 3.7. Home Screen
- 3.8. Four-Channel Monitoring
- 3.9. Home Screen Trend Graphs
- 3.10. Home Screen Numeric Section
- 3.11. Home Screen Menus
- 3.12. Home Screen Options
- 3.13. Secondary Trend Selection
- 3.14. Home Screen Audio Alarm Settings
- 3.15. Settings and Maintenance
- 3.16. Info Options
- 3.17. Quick Reference Checklist
- 4. Operating the BIS™ Advance Monitoring System
- 4.1. Preparing for Operation
- 4.2. Cases
- 4.3. Alarms and Messages
- 4.4. Chart Data
- 4.5. Menu Map
- 4.6. Institutional Settings
- 5. Data Storage, Transfer, and Export
- 5.1. Cybersecurity and Data Integrity
- 5.2. Monitor Data Memory
- 5.3. BISx Data Memory
- 5.4. Types of Exported Data
- 5.5. Live Case Export
- 5.6. Saved Cases Export
- 5.7. Recording a Snapshot Event
- 5.8. BIS™ Saved Data Files
- 5.9. Logs Export
- 5.10. Viewing and Printing Saved Data in PDF Format
- 6. Service and Maintenance
- 6.1. Introduction
- 6.2. Servicing the BIS™ Advance Monitor
- 6.3. Battery Handling
- 6.4. Cleaning the BIS™ Advance Monitor
- 6.5. Instrument Identification
- 7. Diagnostics and Troubleshooting
- 7.1. Diagnostics
- 7.2. Troubleshooting
- 7.3. Administrator Mode
- 7.4. Demo Mode
- 7.5. Glossary
- 7.6. Specifications
- 7.6.1. General Specifications
- 7.6.2. Operating Environments
- 7.6.3. Power Supply
- 7.6.4. Battery Specifications
- 7.6.5. Controls and Connectors
- 7.6.6. Alarms
- 7.6.7. Display
- 7.6.8. Sound Pressure Data
- 7.6.9. BIS Specifications
- 7.6.10. EEG Specifications
- 7.6.11. BISx Module Specifications
- 7.6.12. Software/GUI Specifications
- 7.7. Electromagnetic Compatibility Specifications
- 7.8. Product Compliance
- 7.9. BIS™ Advance Components, Accessories, and Documentation
- 7.10. Warranty
- 7.11. Software License Agreement
Chart Data
BIS™ Advance Monitor
173
An example of the alarm settings screen is seen in Figure 56. Alarm Settings Screen on
page 171. The other alarms are set using the same procedure.
If an alarm is enabled, its range will display on the numeric panel of the home screen,
next to the parameter name. If an alarm is disabled, the disabled icon will show on
the numeric panel of the home screen, next to the parameter name. Reference Figure
36. BIS Numeric on page 107 for an example.
Audio alarm options are as seen in Table 17. Audio Alarm Options, below. Both alarm
volume and the Audio Off reminder can be set in the alarm limits screen. The alarm
volume can also be set on the Home screen; reference 3.14 Home Screen Audio Alarm
Settings on page 126.
Table 17. Audio Alarm Options
Feature Options Factory Default Option
Audio Alarm Volume
7 audio levels, from very low
to very high
Level 4
Audio Off Reminder ON, OFF OFF
4.4. Chart Data
The monitor provides the option of viewing data in the form of a chart rather than as
graphs. In both chart and graphical display, live data in numerical format will appear
at the right side of the screen.
To view chart data, click the chart icon at the top left of the home screen. The chart
icon appears in Figure 57. Graph/Chart Toggle Icon, below, at the right. If you are
currently viewing chart data, click the graph icon to return to the graphical display.
Figure 57. Graph/Chart Toggle Icon
Chart data of the live current case, or chart data of a past case in Case Review, can be
selected for viewing instead of graphical data.