Intel Dual Band Wireless-AC 3160 Regulatory Markings

Intel Corporation – WPRD – Connectivity Engineering Manufacturing Service
Page 13 of 20 April 1, 2014
Antenna
Type
A
ntenna
Location
(Main/Aux)
2.4GHz
Peak Gain
in dBi*
2.6GHz
Peak Gain
in dBi*
5.2GHz
Peak Gain
in dBi*
5.5GHz
Peak Gain
in dBi*
5.7GHz
Peak Gain
in dBi*
Main
Aux
MIMO
*All Antenna gains include cable loss
3.24 3.47 3.73 4.77 4.97PIFA
 Antenna Placement
 To comply with RF exposure requirements the antenna(s) used with the wireless adapter must be installed to provide a minimum separation distance from
all persons in all operating modes and orientations of the host platform as specified by the FCC grant conditions. The antenna separation distance applies
to both horizontal and vertical orientations.
Intel® Wireless Adapter
Minimum required antenna-to-user separation
distance (mm)
Intel® Dual Band Wireless-AC 3160 8
Details of the authorized antenna separation distances can be found at http://www.fcc.gov/oet/ea/ by entering the FCC ID number of the device.
Interference Statement
This wireless adapter has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This wireless adapter generates, uses, and can radiate radio
frequency energy. If the wireless adapter is not installed and used in accordance with the instructions, the wireless adapter may cause harmful interference to radio
communications. There is no guarantee, however, that such interference will not occur in a particular installation. If this wireless adapter does cause harmful
interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference
by taking one or more of the following measures:
 Reorient or relocate the receiving antenna of the equipment experiencing the interference.
 Increase the distance between the wireless adapter and the equipment experiencing the interference.
 Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is
connected.
 Consult the dealer or an experienced radio/TV technician for help.