Computer Hardware User Manual

Chapter 1

Introduction

1-1 Product Specifications

Processor

- Supports Intel® Celeron/Pentium 4 Socket 478 CPU with Hyper-Threading

Technology

- Supports Intel® Celeron / Pentium 4 system bus at 400/533/800MHz (FSB 800 is

conditionally supported. Please refer to Memory Compatibility Chart for details)

Chipset

- Intel® 845PE + ICH4 Chipset

- Supports Hyper-Threading Technology

Main Memory

- Supports two 184 pin DDR DIMMs up to 2GB

- Supports PC 2100/2700/3200 non –ECC DDR SDRAM modules

Expansion Slots

- One 1.5V AGP slot for 4X AGP

- Five 32-Bit PCI slots (v2.2 compatible).

6-channel audio subsystem via AC-link

- With external high quality CMedia 9739A 6-channel AC’97 Codec

- Complete software driver supports for Windows OS

Ultra DMA-66/100 PCI IDE Controller

- Supports two IDE ports up to 4 ATAPI devices

- Supports PIO Mode 4 up to 16.6MBps, Multi Mode 4 up to 66MBps and Multi

Word Mode 5 up to 100MBps

- Bus-Mastering software drivers for all common multi-tasking operating systems

Embedded USB 2.0 Host Controller

- Three EHCI USB 2.0 controllers support total 6 USB 2.0/1.1 ports

- Supports USB 2.0 high-speed device @480Mb/s transfer rates

- Optional USB adapter for additional USB 2.0/1.1 ports

On-board ITE 8702 Super I/O Controller

- Two UARTs support two serial ports

- One SPP/ECP/EPP parallel Port

- One floppy disk drive connector supports up to 2.88MB