User's Guide

Connect a Bluetooth device
Bluetooth is a short-range wireless communications technology. Use Bluetooth to establish a wireless
connection between your computer and another Bluetooth-enabled device within a distance of about 10 m
(32.8 ft).
To connect a Bluetooth device using swift pair
Step 1. Turn on the Bluetooth device that supports swift pair and make it discoverable. For more
information, see the document that comes with the Bluetooth device.
Step 2. Select Connect when a swift pair notification appears that a new Bluetooth device was found.
To connect a Bluetooth device using conventional pair
If you do not receive the swift pair notification, you can also do as the follows to pair a Bluetooth device.
Step 1. Turn on the Bluetooth device and make it discoverable.
Step 2. Select
ᇆ ᇆDevices ᇆBluetooth and other devices ᇆAdd Bluetooth or other devices ᇆ
Bluetooth. A list of available Bluetooth devices is displayed.
Step 3. Select the target Bluetooth device and start pairing.
Use a microSD card
Your computer has a microSD card slot on the left side of the computer. You can insert a microSD card into
the microSD card slot to expand the computer local storage capacity.
Attention:
• Before handling the microSD card, touch a metal table or a grounded metal object. Otherwise the card
might get damaged by the static electricity from your body.
• During data transfer, do not put your computer into sleep mode; otherwise, your data could get damaged.
Install a microSD card
Step 1. Use an ejection tool to eject the card tray, and then slide the tray out of the computer.
Chapter 2. Get started with your computer 13