User's Guide

6. Remove the M.2 solid-state drive and the thermal pad:
a. Remove the screw that secures the M.2 solid-state drive
1 . The M.2 solid-state drive is released
from the secured position and pivots upward.
b. Carefully remove the drive out of the slot
2 .
c. Peel off the thermal pad from the M.2 solid-state drive
3 .
7. Install a new M.2 solid-state drive and a new thermal pad:
a. Attach the new thermal pad to the new M.2 solid-state drive
1 .
b. Align the contact edge of the M.2 solid-state drive with the key in the slot. Then, carefully insert the
drive into the slot at an angle of about 20 degrees and pivot the M.2 solid-state drive downward
2 .
c. Install the screw to secure the M.2 solid-state drive
3 .
8. Reinstall the base cover assembly.
58
X1 Yoga and X1 Carbon User Guide