8S661FXM-RZ Intel Pentium® 4 Processor Motherboard User's Manual Rev. 1101 12ME-S661FXMRZ-1101 Copyright © 2004 GIGABYTE TECHNOLOGY CO., LTD Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. ("GBT"). No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the property of their respective owners. Notice Please do not remove any labels on motherboard, this may void the warranty of this motherboard.
Mother Board 8S661FXM-RZ Mar. 20, 2004 Motherboard 8S661FXM-RZ Mar.
Preparing Your Computer Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer. 1. Unplug your computer when working on the inside. 2. Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case. 3.
English Table of Content Chapter 1 Introduction .................................................................................................... 5 Features Summary ..................................................................................................................... 5 8S661FXM-RZ Motherboard Layout ............................................................................................ 7 Block Diagram ...................................................................................
English Chapter 1 Introduction Features Summary CPU Chipset Memory Slots On-Board IDE y y y y y y y y y y y y y y y On-Board Floppy On-Board Peripherals On-Board VGA On-Board LAN On-Board Sound BIOS y y y y y y y y y y y y y y y y Socket 478 for Intel® Micro FC-PGA2 Pentium ® 4 processor Support Intel® Pentium® 4 (Northwood, Prescott) processor Support Intel® Pentium® 4 Processor with HT Technology Intel® Pentium ® 4 800/533/400MHz FSB 2nd cache depends on CPU North Bridge:SiS® Chipset 661FX
English I/O Control Hardware Monitor Additional Features Form Factor y y y y y y y IT8705 CPU/System Fan Revolution detect CPU temperature detect System Voltage Detect Supports EasyTune 4 Supports @BIOS 23.0cm x 24.4cm Micro ATX size form factor, 4 layers PCB. Please set the CPU host frequency in accordance with your processor's specifications.
English 8S661FXM-RZ Motherboard Layout 23.0 cm KB_MS LPT COMA FDD CPU_FAN COMB 24.4 cm DDR2 DDR1 ICS1883 IDE1 IDE2 SiS 661FX AGP BATTERY PCI1 IT8705 BIOS PCI3 CODEC F_USB1 F_USB2 CD_IN CI* SiS 963L SUR_CEN SPDIF_IO F_PANEL SYS_FAN PCI2 CLR_CMOS F_AUDIO ATX 8S661FXM-RZ GAME ATX_12V LAN USB MIC_IN LINE_OUT LINE_IN VGA SOCKET 478 PWR_LED "*" Only for 8S661FXM-RZ Rev. 1.
Pentium 4 Socket 478 CPU AGP 4X/8X CPUCLK+/- (100/133/200MHz) System Bus 800/533/400MHz AGPCLK (66MHz) 266/333/400MHz DDR RAM VGA Port SiS 661FX MCHCLK (100/133/200MHz) 3 PCI 66 MHz 33 MHz 14.
English Hardware Installation Process To set up your computer, you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- Install expansion cards Step 4- Install I/O Peripherals cables Step 4 Step 1 Step 2 Step 4 Step 4 Step 3 Step 1: Install the Central Processing Unit (CPU) Before installing the processor, adhere to the following warning: 1. Please make sure the CPU type is supported by the motherboard. 2.
English Step 1-1: CPU Installation Socket Actuation Lever Figure 1. Pull the rod to the 90-degree directly. Figure 2. Locate Pin 1 in the socket and look for a (golden) cut edge on the CPU upper corner. Insert the CPU into the socket. (Do not force the CPU into the socket.) Then move the socket lever to the locked position while holding pressure on the center of the CPU. Step 1-2: CPU Cooling Fan Installation Figure 1.
Before installing the memory modules, adhere to the following warning: Please note that the DIMM module can only fit in one direction due to the one notch. Wrong orientation will cause improper installation. Please change the insert orientation. The motherboard has 2 dual inline memory module (DIMM) sockets. The BIOS will automatically detects memory type and size. To install the memory module, just push it vertically into the DIMM socket. The DIMM module can only fit in one direction due to the notch.
English Step 3: Install expansion cards 1. Read the related expansion card's instruction document before install the expansion card into the computer. 2. Please make sure your AGP card is AGP 4X/8X (1.5V). 3. Please carefully pull out the small white- drawable bar at the end of the AGP slot when you try to install/ Uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on the slot .Make sure your AGP card is locked by the small white- drawable bar.
Microphone can be connect to MIC In jack. After installation of the audio driver, you are able to use 2/4/6-channel audio feature by software selection. You can connect "Front speaker" to "Line Out" jack, Connect "Rear speaker" to "Line In" jack and connect "Center/Subwoofer" to "MIC In" jack. ` LAN port LAN is fast Ethernet with 10/100Mbps speed. a USB port Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard, mouse, scanner, zip, speaker...etc.
English 1) ATX_12V (+12V Power Connector) This connector (ATX _12V) supplies the CPU operation voltage (Vcore). If this " ATX_ 12V connector" is not connected, system cannot boot. 4 Pin No. 1 2 3 4 2 1 3 Definition GND GND +12V +12V 2) ATX (ATX Power) AC power cord should only be connected to your power supply unit after ATX power cable and other related devices are firmly connected to the mainboard. 11 20 1 10 Pin No. 1 Definition 3.3V Pin No. 11 Definition 3.3V 2 3.
This connector allows you to link with the cooling fan on the system case to lower the system temperature. 1 Pin No. 1 2 3 Definition GND +12V Sense 5) FDD (Floppy Connector) Please connect the floppy drive ribbon cables to FDD. It supports 360K,720K,1.2M,1.44M and 2.88Mbytes floppy disk types. The red stripe of the ribbon cable must be the same side with the Pin1. 33 34 1 2 6) IDE1/ IDE2(IDE1/IDE2 Connector) Please connect first harddisk to IDE1 and connect CDROM to IDE2.
English 7) F_PANEL (2x10 pins connector) Please connect the power LED, PC peaker, reset switch and power switch etc of your chassis front panel to the F_PANEL connector according to the pin assignment above.
+ CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer's instructions. If you want to erase CMOS... 1. Turn OFF the computer and unplug the power cord. 2. Remove the battery, wait for 30 second. 3. Re-install the battery. 4. Plug the power cord and turn ON the computer.
English 11) CD_IN Connect CD-ROM or DVD-ROM audio out to the connector. 1 Pin No. 1 2 3 4 Definition CD-L GND GND CD_R 12) SPDIF_IO (SPDIF In/Out) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input function. Use SPDIF IN feature only when your device has digital output function. Be careful with the polarity of the SPDIF_IO connector.
Be careful with the polarity of the F_USB connector. Check the pin assignment carefully while you connect the F_USB cable, incorrect connection between the cable and connector will make the device unable to work or even damage it. For optional F_USB cable, please contact your local dealer. 10 9 2 1 Pin No. 1 2 3 4 5 6 7 8 9 10 Definition Power Power USB DXUSB DyUSB DX+ USB Dy+ GND GND No Pin NC 15) CLR_CMOS (Clear CMOS) You may clear the CMOS data to its default values by this jumper.
English 17) CI (Chassis Intrusion, Case Open) * This 2-pin connector allows your system to enable or disable the "Case Open" item in BIOS, if the system case begin remove. 1 "*" Only for 8S661FXM-RZ Rev. 1.1 8S661FXM-RZ Motherboard - 20 - Pin No.
Chapter 2 provides an overview of the BIOS Setup Program, which allows users to modify the basic system configurations. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERING BIOS Setup Turning on the computer and pressing immediately allow you to enter BIOS Setup. If you need more advanced BIOS settings, please press Ctrl and F1 keys on the BIOS main screen to access the the advanced BIOS settings.
English If you can't find the settings you want, press Ctrl and F1 in BIOS main menu to access the hidden advanced options. • Standard CMOS Features This setup page includes all the items in standard compatible BIOS. • Advanced BIOS Features This setup page includes all the items of Award special enhanced features. • Integrated Peripherals This setup page includes all onboard peripherals. • Power Management Setup This setup page includes all the items of Green function features.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features } } } } Date (mm:dd:yy) Time (hh:mm:ss) Fri, Jan 9 2004 22:31:24 IDE IDE IDE IDE [None] [None] [None] [None] Primary Master Primary Slave Secondary Master Secondary Slave Drive A Drive B Floppy 3 Mode Suport [1.44M, 3.
English Drive A / Drive B The category identifies the types of floppy disk (drive A and drive B) installed in the computer. None No floppy disk is installed 360K, 5.25" 5.25 inch PC-type standard drive; 360K byte capacity. 1.2M, 5.25" 5.25 inch AT-type high-density drive; 1.2M byte capacity (3.5 inch when 3 Mode is Enabled). 720K, 3.5" 3.5 inch double-sided drive; 720K byte capacity 1.44M, 3.5" 3.5 inch double-sided drive; 1.44M byte capacity. 2.88M, 3.5" 3.5 inch double-sided drive; 2.88M byte capacity.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Advanced BIOS Features First Boot Device [Floppy] Second Boot Device [HDD-0] Third Boot Device [CDROM] Boot Up Floppy Seek [Disabled] Password Check [Setup] CPU Hyper-Threading # [Enabled] Init Display First [AGP] Item Help Menu Level} Select Boot Device Priority [Floppy] Boot from floppy [LS120] Boot from LS120 [HDD-0] Boot from First HDD [HDD-1] Boot from Second HDD higf: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10:
English Password Check Setup The system will boot but will not access to Setup page if the correct password is not entered at the prompt. (Default value) System The system will not boot and will not access to Setup page if the correct password is not entered at the prompt. CPU Hyper-Threading Disabled Enabled Disable CPU Hyper Threading. Enable CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Integrated Peripherals IDE1 Conductor Cable IDE2 Conductor Cable On-Chip Primary PCI IDE On-Chip Secondary PCI IDE AC97 Audio Onboard LAN device USB Controller USB Legacy Support Onboard Serial Port 1 Onboard Serial Port 2 Onboard Parallel Port Parallel Port Mode ECP Mode Use DMA Game Port Address [Auto] [Auto] [Enabled] [Enabled] [Enabled] [Enabled] [Enabled] [Disabled] [3F8/IRQ4] [2F8/IRQ3] [378/IRQ7] [ECP] [3] [201] Midi Port Address x Midi Port
English Onboard LAN device Enabled Enable Onboard LAN function. (Default value) Disabled Disable this function. USB Controller Enabled Enable USB Controller. (Default value) Disabled Disable USB Controller. USB Legacy Support Enabled Disabled Enable USB Legacy Support. Disable USB Legacy Support. (Default value) Onboard Serial Port 1 Disabled 3F8/IRQ4 2F8/IRQ3 3E8/IRQ4 2E8/IRQ3 Auto Disable onboard Serial port 1. Enable onboard Serial port 1 and address is 3F8.
Disabled 201 8209 Disable this function. Enable gameport and set gameport address to 201. (Default Value) Enable gameport and set gameport address to 209. Midi Port Address Disabled 300 330 Disable this function.(Default Value) Enable midiport and set midiport address to 300. Enable midiport and set midiport address to 330. Midi Port IRQ 5 10 Set Midi Port IRQ to 5. Set Midi Port IRQ to 10.
English System after AC Back Off On LastState When AC-power back to the system, the system will be in "Off" state. (Default Value) When AC-power back to the system, the system will be in "On" state. When AC-power back to the system, the system will return to the Last state before AC-power off. IRQ [3-7, 9-15], NMI Disabled Disable this function. Enabled Enable this function. (Default value) ModemRingOn Disabled Disable Modem Ring on function. Enabled Enable Modem Ring on function.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PnP/PCI Configurations PCI 1 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment [Auto] [Auto] [Auto] Item Help Menu Level} Device(s) using this INT: Display Cntrlr -Bus 1 Dev 0 Func 0 higf: Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Save Defaults ESC: Exit F1: General Help F7: Optimized Defaults PCI 1 IRQ Assignment Auto Auto assign IRQ to PCI 1.
English PC Health Status CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PC Health Status Reset Case Open Status * Case Opened * VCORE DDR2.5V +3.3V +12V Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN Speed [Disabled] No 1.71V 4.99V 3.29V 11.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software MB Intelligent Tweaker (M.I.T.) x x x x x x x x Configure DRAM Timing Cas Latency Setting DRAM RAS Active Time DRAM RAS Precharge Time DRAM RAS to CAS Delay CPU Clock Ratio Linear Frequency Control CPU Clock (MHz) DRAM Clock (MHz) AGP/PCI Clock Control AGP Clock (MHz) PCI Clock (MHz) [Auto] 2.
English CPU Clock (MHz) 100~355 Select CPU Clock to 100MHz~355MHz. If you use FSB400 Pentium 4 processor, please set "CPU Clock" to 100MHz.If you use FSB533 Pentium 4 processor, please set "CPU Clock" to 133MHz. If you use FSB800 Pentium 4 processor, please set "CPU Clock" to 200MHz. Incorrect using it may cause your system broken. For power End-User use only! DRAM Clock (MHz) Please set DRAM Clock according to your requirement. If you use DDR200 DRAM module, please set "DRAM Clock(MHz)" to 200.
English Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) 1984-2004 Award Software } Standard CMOS Features Top Performance } } Advanced BIOS Features Integrated Peripherals Load Fail-Safe Defaults Load Optimized Defaults } } Power Management Setup PnP/PCI Configurations Set Supervisor Password Set User Password } } PC Health Status Frequency/Voltage Control Save & Exit Setup Exit Without Saving higf: Select Item ESC: Quit F8: Q-Flash F10: Save & Exit Setup Load Fail-Safe Defaults Fail
English Type the password, up to eight characters, and press . You will be asked to confirm the password. Type the password again and press . You may also press to abort the selection and not enter a password.To disable password, just press when you are prompted to enter password. A message "PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is disabled, the system will boot and you can enter Setup freely.
English Revision ChapterHistory 3 Install Drivers Install Drivers Pictures below are shown in Windows XP Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device icon in "My computer", and execute the setup.exe. INSTALL CHIPSET DRIVER This page shows the drivers that need to be installed for the system.
English Driver install finished!! you have to reboot system!! Item Description n SIS AGP Driver AGP interface driver for SiS series chipset. n SIS 661FX VGA Driver VGA driver for VGA integrated SiS 661FX chipset. n USB Patch for WinXP This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP. n SiS PCI Lan Driver SiS Series Lan driver. n C-Media AC97 Audio Driver Audio driver for C-Media AC97 codec chipset. n SIS USB 2.0 Driver USB2.0 driver for SiS series chipset.
English - 39 - Driver Installation
English CONTACT US Contact us via the information in this page all over the world. — Taiwan Gigabyte Technology Co., Ltd. Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien, Taiwan, R.O.C. Tel: 886 (2) 8912-4888 Fax: 886 (2) 8912-4003 Tech. Support: http://tw.giga-byte.com/TechSupport/ServiceCenter.htm Non-Tech. Support (Sales/Marketing issues): http://ggts.gigabyte.com.tw/nontech.asp Website: http://www.gigabyte.com.tw — USA G.B.T. INC. Address: 17358 Railroad St, City of Industry, CA 91748.
