Product Data Sheet / Brochure
Table Of Contents
- Intel® RealSense™ Depth Camera D400-Series Datasheet
- Contents
- Revision History
- 1 Description and Features
- 2 Introduction
- 2.1 Disclaimer
- 2.2 Purpose and Scope of this Document
- 2.3 Terminology
- 2.4 Overview
- 2.5 Stereo Vision Depth Technology Overview
- 2.6 D400-Series Camera Block Diagram
- 2.7 Depth Module
- 2.8 Color Image Signal Processor (ISP)
- 2.9 Intel® RealSense™ Vision Processor D4 Card
- 2.10 D400-Series Depth Cameras Thermals
- 2.11 Storage and Operating Conditions
- 3 Functional Specification
- 4 Software Package
- 5 Firmware
- 6 Calibration Support
- 7 Regulatory Compliance
- 8 Mechanical Drawings
Introduction
Datasheet 19
Table 2-12. Intel® RealSense™ Vision Processor D4 Card Components
Components Description
Intel® RealSense™ Vision Processor
D4
The Intel RealSense Vision Processor D4 is a
purpose-built ASIC for computing real time depth
and accelerating computer vision, at significantly
faster speeds and fraction of the power compared
to host based compute.
16Mb Serial Flash
Intel® RealSense™ Vision Processor D4 firmware
storage
24MHz Crystal Clock source for Vision Processor
Realtek* ISP with external serial flash Color image signal processor
Camera Receptacle 50 pin receptacle for connection to Depth Module
Tracking Module Receptacle
50 pin connector receptacle for connection to
Tracking Module and/or RGB sensor
USB Type-C
USB peripheral connector for connection to Host
USB3.0 port
External Sensor Sync Connector Interface to external sensor interrupts/sync signals
Voltage Regulators
DC to DC converters powering Intel® RealSense™
Vision Processor D4 Card, Depth Module and
Tracking Module
Mounting holes
Intel® RealSense™ Vision Processor D4 Card
secure mounting
Figure 2-8. Intel® RealSense™ Vision Processor D4 Card
2.9.1 Power Requirements
The Depth Camera is powered through VBUS power of the USB connector. The Intel®
RealSense™ Vision Processor D4 Card in turn power sources the Depth Module.