User's Manual

Troubleshooting
46
Since a Complete Restore deletes all user data as well
as additionally installed programs, please backup your
important data first using the Data Backup function,
before running Complete Restore.
4
The computer boots up into restoration mode and the
restoration progress message appears. If you select
OK , the
restoration begins. The restoration may take some time,
please wait for a moment.
5
When the ‘Restart the System’ message appears after the
restoration is complete, select
OK to restart the system.
Make sure that the power cord is connected while the
restoration is in process. The first time the computer boots
up after a Complete Restore has been performed, the
speed of the boot process may be slowed down due to
the system optimization process. At this time, do not shut
the computer down by force.
In the Advanced menu, you can change the size of the
hard drive partitions (e.g. C: and D:).
•
Make sure to backup your data in advance, as all data
will be deleted after the partition size is changed.
•
The Advanced menu appears only when the computer
boots up in the restoration area by pressing the
F4 key
during the booting sequence.