User's Manual

Basics
27
4
Restart the computer.
•
If the computer wakes up from sleep mode inadvertently,
disable the Wake on LAN feature.
•
If you turn off the computer without disabling the Wake on
LAN feature while connected to a network, the LAN LED
may not turn off.
•
The Wake on LAN feature may not work when
simultaneously connected to a wired and wireless LAN.
To use the Wake on LAN feature, set the Wireless LAN to
Disable .
•
The Wake on LAN feature may not work while using the
Hybrid power saving feature. To disable the Hybrid power
saving feature, select
Control Panel
→
Power Options .
Wake on LAN (WOL) feature
Activate the system remotely from sleep mode when a signal,
such as a magic packet command, is received via a wired LAN.
1
Select the Start button ( )
→
Control Panel
→
Network
and Internet
→
Network and Sharing Center
→
Change
adapter settings
.
2
Right-click Local Area Connection and select Properties .
3
Select Configure...
→
Power Management
→
Allow this
device to wake the computer
→
OK .