User's Manual

Basics
24
3
Connect the power cord to the external display.
4
Turn on the display and change its display mode to one that
supports an external input.
5
Press and hold and press . The display mode selection
window will appear.
While pressing and holding
, press to select a mode.
•
Duplicate : Show the screen on both the computer and the
external display.
•
Extend : Extend the screen to the external display.
•
Computer only : Show the screen on the computer
monitor only.
•
Projector only : Show the screen on the external display
only.
2
Connect the other end of the cable to the D-SUB port or HDMI
port of the external display.
If the display has several HDMI ports, connect the cable to the
DVI IN port.
<When using a VGA cable>
<When using a HDMI cable>
Monitor port
HDMI port
HDMI port
D-SUB port