Intel Pentium M Processor with 2-MB L2 Cache and 533-MHz Front Side Bus Datasheet

60 Datasheet
Thermal Specifications and Design Considerations
NOTES:
1. The TDP specification should be used to design the processor thermal solution. The TDP is not the maximum
theoretical power the processor can dissipate.
2. Not 100% tested. These power specifications are determined by characterization of the processor currents at
higher temperatures and extrapolating the values for the temperature indicated.
3. As measured by the on-die Intel Thermal Monitor. The Intel Thermal Monitor’s automatic mode is used to
indicate that the maximum T
J
has been reached. Refer to Section 5.1 for more details.
4. The Intel Thermal Monitor automatic mode must be enabled for the processor to operate within
specifications.
Table 5-1. Power Specifications for Intel
®
Pentium
®
M Processor
Symbol Processor Number
Core Frequency
& Voltage
Thermal Design
Power
Unit Notes
TDP 780 2.26 GHz & HFM Vcc 27 W At 100 °C, Notes
1, 4
770 2.13 GHz & HFM Vcc 27
760 2.00 GHz & HFM Vcc 27
750 1.86 GHz & HFM Vcc 27
740 1.73 GHz & HFM Vcc 27
730 1.60 GHz & HFM Vcc 27
Not Applicable 800 MHz & LFM Vcc 10.8
Symbol Parameter Min Typ Max Unit Notes
P
AH,
P
SGNT
Auto Halt, Stop Grant Power W At 50 °C, Note 2
at LFM Vcc 5.1
at HFM Vcc 16.2
P
SLP
Sleep Power W At 50 °C, Note 2
at LFM Vcc 4.9
at HFM Vcc 15.8
P
DSLP
Deep Sleep Power W At 35 °C, Note 2
at LFM Vcc 3.7
at HFM Vcc 12.2
P
DPRSLP1
Deeper Sleep Power @0.748 V 1.2 W At 35 °C, Note 2
P
DPRSLP2
Deeper Sleep Power @0.726 V 1.1 W At 35 °C, Note 2
T
J
Junction Temperature 0 100 C Notes 3, 4