Intel Wireless 7260 Family Regulatory Markings

Intel Corporation – Mobile Communication Group
Page 6 of 13 Aug 26, 2013
• Using the wireless adapter in any other environment where the risk of interference with other devices or
services is perceived or identified as being harmful.
If you are uncertain of the policy that applies to the use of wireless adapters in a specific organization or
environment (an airport, for example), you are encouraged to ask for authorization to use the adapter before you
turn it on.
Regulatory information for the OEMs and Integrators
The guidelines described within this document are provided to OEM integrators installing Intel® wireless
adapters in notebook and tablet PC host platforms. Adherence to these requirements is necessary to meet the
conditions of compliance with FCC rules, including RF exposure. When all antenna type and placement
guidelines described herein are fulfilled the Intel® wireless adapters may be incorporated into notebook and
tablet PC host platforms with no further restrictions. If any of the guidelines described herein are not satisfied it
may be necessary for the OEM or integrator to perform additional testing and/or obtain additional approval.
The OEM or integrator is responsible to determine the required host regulatory testing and/or obtaining the
required host approvals for compliance.
• Intel® wireless adapters are intended for OEMs and host integrators only.
• The Intel® wireless adapter FCC Grant of Authorization describes any limited conditions of modular
approval.
• The Intel® wireless adapters must be operated with an access point that has been approved for the
country of operation.
• Changes or modification to Intel® wireless adapters by OEMs, integrators or other third parties is not
permitted. Any changes or modification to Intel® wireless adapters by OEMs, integrators or other third
parties will void authorization to operate the adapter.
Information to Be Supplied to the End User by the OEM or Integrator
The following regulatory and safety notices must be published in documentation supplied to the end user of the
product or system incorporating the Intel® wireless adapter, in compliance with local regulations. Host system
must be labeled with "Contains FCC ID: XXXXXXXX", FCC ID displayed on label.
The Intel® wireless adapter must be installed and used in strict accordance with the manufacturer's instructions
as described in the user documentation that comes with the product. Intel Corporation is not responsible for any
radio or television interference caused by unauthorized modification of the devices included with the wireless
adapter kit or the substitution or attachment of connecting cables and equipment other than that specified by
Intel Corporation. The correction of interference caused by such unauthorized modification, substitution or
attachment is the responsibility of the user. Intel Corporation and authorized resellers or distributors are not
liable for any damage or violation of government regulations that may arise from the user failing to comply
with these guidelines.
Local Restriction of 802.11a, 802.11b, 802.11g, and 802.11n Radio Usage
The following statement on local restrictions must be published as part of the compliance documentation for all
802.11a, 802.11b, 802.11g and 802.11n products.
Caution: Due to the fact that the frequencies used by 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac
wireless LAN devices may not yet be harmonized in all countries, 802.11a, 802.11b, 802.11g and 802.11n
products are designed for use only in specific countries, and are not allowed to be operated in countries other
than those of designated use. As a user of these products, you are responsible for ensuring that the products are
used only in the countries for which they were intended and for verifying that they are configured with the
correct selection of frequency and channel for the country of use. The device transmit power control (TPC)