Voltage Regulator Module (VRM) 10.2L Design Guidelines

Voltage Regulator Module (VRM) 10.2L Design Guidelines 23
5 Processor Voltage Output
Protection
These are features built into the VRM to prevent damage to itself, the processor, or other system
components.
5.1 Over-Voltage Protection (OVP) - PROPOSED
The OVP circuit monitors the processor core voltage (Vcc) for an over-voltage condition. If the
output is more than 200 mV above the VID level, the VRM shuts off the output.
5.2 Over-Current Protection (OCP) - PROPOSED
The core VRM should be capable of withstanding a continuous, abnormally low resistance on the
output without damage or over-stress to the unit. Output current under this condition will be limited
to no more than 120% of the maximum peak rated output of the voltage regulator.
§