Intel Xeon Processor with 800 MHz System Bus Thermal/Mechanical Design Guide
Intel® Xeon™ Processor with 800 MHz System Bus Thermal/Mechanical Design Guidelines 7
1 Introduction
1.1 Objective
The objective of this document is to describe the reference thermal solution and design parameters
required for the Intel® Xeon™ Processor with 800 MHz System Bus. It is also the intent of this
document to comprehend and demonstrate the processor cooling solution features and
requirements. Furthermore, this document provides an understanding of the processor thermal
characteristics, and discusses guidelines for meeting the thermal requirements imposed on the
entire life of the processor. The thermal/mechanical solutions described in this document are
intended to aid component and system designers in the development and evaluation of processor
compatible thermal/mechanical solutions.
1.2 Scope
The thermal/mechanical solutions described in this document pertain only to a solution(s) intended
for use with Intel Xeon Processor with 800 MHz System Bus in 1U, 2U, 2U+ and workstation form
factors systems.This document contains the mechanical and thermal requirements of the processor
cooling solution. In case of conflict, the data in the Intel® Xeon™ Processor with 800 MHz System
Bus at 2.80 GHz and 3.60 GHz Datasheet supersedes any data in this document. Additional
information is provided as a reference in the appendix section(s).
Low voltage (LV) Intel Xeon Processor with 800 MHz System Bus is outside the scope of this
document.
1.3 References
Material and concepts available in the following documents may be beneficial when reading this
document.
Table 1-1. Reference Documents
Document Comment
European Blue Angel Recycling Standards http://www.blauer-engel.de
Intel
®
Xeon™ Processor Thermal Design Guidelines http://www.developer.intel.com
mPGA604 Socket Design Guidelines http://www.developer.intel.com
Intel® Xeon™ Processor with 800 MHz System Bus at 2.80 GHz and
3.60 GHz Datasheet
http://www.developer.intel.com
Intel® Xeon™ Processor with 800 MHz System Bus Enabled
Components Mechanical Models (in IGES and ProE* format)
http://www.developer.intel.com
Intel® Xeon™ Processor with 800 MHz System Bus Thermal Models (in
Flotherm* and Icepak*)
http://www.developer.intel.com