64-bit Intel Xeon Processorwith 1MB L2 Cache Thermal/Mechanical Design Guidelines

R
64-bit Intel
®
Xeon™ Processor MP with 1 MB L2 Cache 5
Thermal/Mechanical Design Guidelines
B-9 Measuring Resistance between Thermocouple and IHS .................................... 42
B-10 Applying the Adhesive on the Thermocouple Bead............................................. 42
B-11 Thermocouple Wire Management in the Groove................................................. 43
B-12 Removing Excess Adhesive from the IHS ........................................................... 44
B-13 Filling the Groove with Adhesive.......................................................................... 44
B-14 Thermocouple Wire Management........................................................................ 45
B-15 Local Air Thermocouple Placement for Passive Heatsinks ................................. 45
B-16 Local Air Thermocouple Placement for Active Heatsinks (Side View) ................ 46
B-17 Local Air Thermocouple Placement for Active Heatsinks (Plan View) ................ 46
D-1 Random Vibration PSD........................................................................................ 49
D-2 Shock Acceleration Curve.................................................................................... 50
F-1 Thermal Sensor Circuit ........................................................................................ 56
F-2 Concept for Clocks under Thermal Monitor Control ............................................ 56
F-3 Thermal Monitor 2 Frequency and Voltage Ordering .......................................... 58
F-4 On-Die Thermal Diode Sensor Time Delay ......................................................... 60
Tables
2-1 Performance Target Table (Sheet 1 of 2) .............................................................. 9
2-2 Performance Target Table (Sheet 2 of 2) ............................................................ 14
2-3 Fan Speed Control, T
CONTROL
and T
DIODE
Relationship ........................................ 16
2-4 Recommended Thermal Grease Dispense Weight ............................................. 24
A-1 Mechanical Drawing List ...................................................................................... 27
B-1 Test Equipment.................................................................................................... 37