Update

R
14 Specification Update
Specification Clarifications
1. Graphics Limitations Using ECC DIMM Memory
Memory with ECC enabled requires more system memory resources. This will cause the Integrated graphics engine to
have less memory bandwidth for accesses to the graphics frame buffer. A system BIOS workaround is required to allow
integrated graphics more access time to memory. (contact your BIOS vendor for latest updates).
SO-DIMM memory with ECC enabled is not supported.
DIMM memory with ECC enabled will be supported under the following display configurations for non- mobile
configurations. Please see the following tables below for supported display configurations.
Supported internal graphics display configuration with ECC enabled:
Graphics Core
(Minimum Frequency)
200MHz
Memory
(Minimum Frequency) 266MHZ
FSB
(Minimum Frequency) 400 MHz
Display Usage Dual Independent Display
Dual Pipe Independent
(Maximum Display Resolution)
Please contact your local Field Represenative for supported Dual
Independent Display configurations
Single Pipe Independent
(Maximum Display Resolution)
1600x1200, 2 BPP, 85 Hz (DCLK=56.25MHz) on CRT/DVO
1600x1200, 4 BPP, 85 Hz (DCLK=56.25MHz) on CRT/DVO
1600x1200, 4 BPP, 60 Hz (DCLK=65MHz ) on LVDS
LVDS Support Yes
ADD card Support Yes
Display Concurrency 1 Plane Per Pipe + Cursor + Overlay
SSC Support No
NOTE: Bytes per pixel (BPP)
§