Datasheet

Signal Description
R
Datasheet 47
2.6.5 Analog Display
Table 17. Analog Display Signal Descriptions
Signal Name Type Description
VSYNC O
CMOS
CRT Vertical Synchronization: This signal is used as the vertical sync
signal.
HSYNC O
CMOS
CRT Horizontal Synchronization: This signal is used as the horizontal
sync signal.
RED O
Analog
Red (Analog Video Output): This signal is a CRT Analog video output
from the internal color palette DAC. The DAC is designed for a 37.5-Ω
equivalent load on each pin (e.g., 75-Ω resistor on the board, in parallel
with the 75-Ω CRT load).
RED# O
Analog
Red# (Analog Output): Tied to ground.
GREEN O
Analog
Green (Analog Video Output): This signal is a CRT analog video output
from the internal color palette DAC. The DAC is designed for a 37.5-Ω
equivalent load on each pin (e.g., 75-Ω resistor on the board, in parallel
with the 75-Ω CRT load).
GREEN# O
Analog
Green# (Analog Output): Tied to ground.
BLUE O
Analog
Blue (Analog Video Output): This signal is a CRT Analog video output
from the internal color palette DAC. The DAC is designed for a 37.5-Ω
equivalent load on each pin (e.g., 75-ohm resistor on the board, in parallel
with the 75-Ω CRT load).
BLUE# O
Analog
Blue# (Analog Output): Tied to ground.