Update

R
Specification Clarifications
1. Strapping Option Clarification
Notes 1, 2, and 3 have been added to Table 53, “Strapping Configuration Table” in Section 7.1, pg 227
of the 852GME/852PM datasheet.
GST[2]
Note: Intel
852GME
GMCH Only
§Clock Config: Bit_2
PSB 400 = 0
PSB 533 = 1
See notes 1, 2, 3 DVO Hi-Z
NOTES:
1.
2.
3.
External pull-ups/downs will be required on the board to enable the non-default state of the straps.
Only GST[2] is used to strap the PSB frequency to either 400MHz or 533MHz, GST0 and GST1 must be left
un-strapped.
DDR and GFX frequencies are set by BIOS programming of the HPLLCC register (D0,F3, reg C0-C1h).
§
14 Intel
®
852GME/852PM Specification Update