Update

R
6.
A6,B6 - Display may flicker when integrated graphics and ECC support are
enabled.
Problem: Display flicker and flashing may occur when integrated graphics and ECC support are enabled under
certain graphics resolution modes.
Implication: A potentially undesirable amount of display flicker may occur.
Workaround: No workaround available.
Status: There are no plans to fix this erratum in silicon.
7. A7, B7 - Anomalous system behavior may occur when AGP GART size is 64MB
and APBASE bit 27 Is set
Problem: Incorrect address decoded when AGP aperture size is set to 64MB and the aperture base has bit 27 set
(e.g. APBASE=0xD8000000 causes failures, but 0xD0000000 is fine).
Implication: Problem may result in anomalous system behavior which can cause a system hang.
Workaround: Use an aperture base size of 128MB or 256MB. If using a 64MB aperture size, set APBASE such that
bit 27 is cleared (e.g. use 0xD0000000 instead of 0xD8000000).
Status: There are no plans to fix this erratum in silicon.
§
12 Intel
®
852GME/852PM Specification Update