Datasheet

Processor Integrated I/O (IIO) Configuration Registers
192 Datasheet, Volume 2
3.3.4.2 IIOERRSV—IIO Core Error Severity Register
This register associates the detected IIO internal core errors to an error severity level.
An individual error is reported with the corresponding severity in this register. Software
can program the error severity to one of the three severities supported by IIO. This
register is sticky and can only be reset by PWRGOOD.
3.3.4.3 MIERRSV—Miscellaneous Error Severity Register
IIOERRSV
Bus: 0 Device: 5 Function: 2 Offset: 8C
Bit Attr
Reset
Value
Description
31:14 RV 0h Reserved
13:12 RWS 01b
Overflow/Underflow Error Severity
00 = Error Severity Level 0 (Correctable)
01 = Error Severity Level 1 (Recoverable)
10 = Error Severity Level 2 (Fatal)
11 = Reserved
11:10 RWS 01b
Completer Abort Error Severity
00 = Error Severity Level 0 (Correctable)
01 = Error Severity Level 1 (Recoverable)
10 = Error Severity Level 2 (Fatal)
11 = Reserved
9:8 RWS 01b
Master Abort Error Severity
00 = Error Severity Level 0 (Correctable)
01 = Error Severity Level 1 (Recoverable)
10 = Error Severity Level 2 (Fatal)
11 = Reserved
7:0 RV 0h Reserved
MIERRSV
Bus: 0 Device: 5 Function: 2 Offset: 90
Bit Attr
Reset
Value
Description
31:10 RV 0h Reserved
9:8 RWS 00b DFx Injection Error
7:6 RWS 00b VPP port Error Status Severity
5:4 RWS 00b JTAG TAP Status Severity
3:2 RWS 00b
SMBus Port Status Severity
There is no SMBus; thus, this field is unused.
1:0 RWS 00b Config Register par Severity