User's Manual

Back to Contents Page
Installation under Windows 98SE
Preliminary Notes
The installation instructions in this section are based on the following assumptions:
● The wireless adapter hardware has already been installed in the computer in accordance with the
computer manufacturer's instructions.
● The computer has not been powered on since the hardware installation was completed.
● No other wireless LAN card is installed in the computer.
To install the driver before installing hardware, use Start > Run and browse to the file SetupWLD.exe in
the path PROW7100\WINSE-ME on the Intel CD. After running SetupWLD.exe, shut down the computer and
install the hardware. When the computer restarts, the driver will be automatically installed.
Driver Installation
To install the software in Windows* 98SE, follow these steps:
1. Power up the computer in which the wireless adapter hardware has just been installed.
2. Wait for Windows to detect the newly installed hardware and display the Add New Hardware Wizard
dialog. Click Next. If Windows does not detect the new hardware, see
Troubleshooting.
3. Insert the Intel CD into your CD drive.
4. On the New Hardware Wizard screen, select Search for the best driver for you device
(Recommended), and click Next, then select CD drive and click Next.
5. On the Network Name screen, click Next to accept the default Network Name (SSID), or enter a
specific SSID for your network, then click Next.
6. On the Data Encryption screen, click Next to accept the default encryption setting None, or enter
specific encryption settings for your network, then click Next.
7. On the Add New Hardware Wizard screen, click Finish.
8. When prompted to restart the computer, click No. You will restart it manually later. Proceed to the
installation of PROSet.
Intel(R) PROSet Installation (Required)
To install the Intel PROSet utility, continue with the following steps:
Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for
installation of utility software. If the Intel(R) PRO Network Connections menu screen does not appear, or if it
does not have a menu item for Wireless LAN Adapters, you can start the PROSet installer manually using Start
> Run and browsing to the file PROSet.msi in the path APPS/PROSet/WN98SEME on the Intel CD supplied
with the product. Skip Steps 9 and 10 below and continue with Step 11.