User's Manual

16. Proceed to Install PROSet II.
Install PROSet II (Required)
Intel PROSet II enables you to test and configure Intel network adapters on computers running Windows* NT
with Service Pack 5 or later. For details about installing Intel PROSet II, see the instructions below.
When you run the PROSet Installer, it checks to see if a previously installed version of PROSet exists on
your computer. If another installation is detected, you will be asked to remove it before proceeding with the
installation of PROSet II. Use Add/Remove Programs in the Control Panel to find and remove any previous
versions of PROSet software.
Some versions of this product do not support the Intel(R) PRO Network Connections menu screen for
installation of PROSet II. If the Intel(R) PRO Network Connections menu screen does not appear when you
insert the Intel CD, or if it appears but does not have a menu item for Wireless LAN Adapters, you can start the
PROSet II installer manually using Start > Run and browsing to the file WSetup.exe in the path
APPS\PROSet\WINNT4 on the Intel CD. Then skip to Step 4 below and continue with the installation.
1. Insert the Intel CD into your CD-ROM drive. The Intel(R) PRO Network Connections screen displays.
(If it doesn't display, use Start, Run and launch the file autorun.exe from the Intel CD.)
2. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters.
3. On the Intel PRO/Wireless LAN Adapters menu screen, click Install Software.
4. On the Welcome to the InstallShield Wizard for Intel(R) PROSet screen, click Next.
5. On the License Agreement screen, after reading the license agreement, select I accept the terms in
the license agreement and click Next.
6. On the Setup Type screen, verify that Typical is selected, then click Next. This is the recommended
setting for a first-time installation. Click Custom if you wish to install PROSet in a nondefault location.
7. On the Ready to Install the Program screen click Install.
8. After the software is installed on your computer, click Finish. Click Exit to close the Intel(R) PRO
Network Connections screen, if displayed.
9. To launch PROSet II, double-click the PROSet II icon in the system tray or in the Control Panel. For
additional information, press F1 or click Help while the program is running.
10. Restart the computer if prompted.
Install Administration Tools (Optional)
Continue with the following steps to install the Intel(R) Wireless Administration Tools Site Survey and AP
Discovery (optional):
1. Insert the Intel CD into your CD-ROM drive. The Intel(R) PRO Network Connections screen displays.
(If it doesn't display, use Start, Run and launch the file autorun.exe from the Intel CD.)
2. On the Intel(R) PRO Network Connections screen, click Wireless LAN Adapters.
3. On the Intel PRO/Wireless LAN Adapters menu screen, click Install AP Admin Tools.
4. On the Welcome to the InstallShield Wizard for Intel(R) Wireless Administration Tools screen,
click Next.