User Manual

Chapter 4. Configuring the Intel® Wireless Gateway
26 Intel® Wireless Gateway User's Guide
Image 7. Routing Table
System Diagnostics
The Systems Diagnostics page displays both the configuration settings and diagnostics for the
Intel® Wireless Gateway. Configuration settings include the device and ISP settings. Diagnostic
settings include the ISP Status, Link Status, Current WAN Connection, LAN MAC Table, and
WAN MAC Table.
Save Settings
Use the Save Settings page to create a backup file for the current settings for the Intel® Wireless
Gateway. If necessary, you can reload these configurations in the future, or they can be loaded to
other Intel® Wireless Gateways with a floppy disk.
Load Settings
Either the default settings or user-defined settings can be reloaded to the Intel® Wireless Gateway.
Exercising the load settings option will cause the current settings for your Intel® Wireless
Gateway to be lost, unless the current settings have been saved to a file. If you want to create a
backup file for the current settings, refer to Save Settings before updating the configurations.
The Load Default Settings page allows you to reload the factory default configurations that came
with the device. When this option is exercised, the default IP address is reset to 192.0.2.1. Click
START to reload the default settings.