User Manual

Chapter 4. Configuring the Intel® Wireless Gateway
22 Intel® Wireless Gateway User's Guide
Specific IP addresses may also be reserved for particular devices in a netowrk. Use the input boxes
under
Reserve IP Address to indicate the IP address and computer name for those devices that
should use a manually-defined IP address.
Click
SUBMIT to store the changes and move to the next section in Advanced Settings.
Virtual Server Settings
Virtual server, in this case, refers to a computer that is not a dedicated server -- that is, the entire
computer is not dedicated to running the server software. Through the Intel® Wireless Gateway,
the devices on a network can act as virtual servers. Use the Virtual Server Settings page to assign
one or more services to specific computers in the network.
In the
Internal IP field, enter the IP address for each virtual server (computer) on the network. For
each computer, select its primary service from the drop-down list. If the computer has more than
one service, enter the same IP address in another
Internal IP field and select a service from the
drop-down list.
Table 4 describes the different service options.
Table 4. Virtual Server Service Options
Service Full Name Description
HTTP
Hyper Text Transfer Protocol Defines how messages are formatted and
transmitted via the Internet
SMTP
Simple Mail Transfer Protocol A protocol for sending email messages
between servers
POP3
Post Office Protocol A protocol used to retrieve email from a
mail server
FTP
File Transfer Protocol The protocol used on the Internet for
sending files
Telnet
Telnet A program used to connect your computer
to a server on the network
IRC
Internet Relay Chat A program that sends and receives messages
to/from people connected anywhere on the
Internet (used for live discussions or chats
over the Internet)
Click
SUBMIT to enter the changes and move to the next section.
Access Control Settings
To deny or grant users access to your wireless network, use the Access Control List. The default
setting for access control is
Disable Access Control List . This feature grants all users with the
correct wireless settings to access the WLAN.
Any user who is on the Grant Access List and has the correct wireless settings has access to the
wireless network. Any user on the Deny Access List is denied access to the wireless network. This
second option is provided in the case that there are many WLAN users and access is denied for
only a few of them. Use the drop-down list to change the permissions for the device.