User Manual

Chapter 4. Configuring the Intel® Wireless Gateway
Intel® Wireless Gateway User's Guide 19
Image 3. ISP Settings
Click
NEXT to continue.
Additional ISP Settings
The Additional ISP Settings page contains additional authentication data that is required by some
ISPs. Additional ISP settings are only necessary when the Intel® Wireless Gateway is set to
function as an access point and gateway.
If your ISP requires that you input a username and password, use the spaces provided to enter
these settings. Use the
Idle Time drop-down list to specify how long your Internet connection
should continue when no activity occurs.
If your ISP requires that you input a host computer name or domain name, enter these settings.
The WAN Ethernet Media Access Control (MAC) Address, or Ethernet Address, is a hardware
address that uniquely identifies every device on a network. If your ISP requires this piece of
information, enter it in the
WAN Ethernet MAC Address field.
Click
NEXT to continue.
Save & Restart
Use the Save & Restart page to submit all the network setting changes you have made. Click Save
& Restart
to update the network configurations for your Intel® Wireless Gateway and reset the
device.