User Manual

12 Intel® Wireless Gateway User's Guide

The following instructions vary depending on your operating system. If you are unable to access

the network settings with these steps, refer to the documentation that accompanied your computer

or operating system software. Or, consult online Help for Windows†, and search for TCP/IP.

• Go into the network settings properties for your network adapter by selecting

Start

, then

Settings

, then

Control Panel

, and finally

Network Settings

• Right click

Network Connection

Adapter

• Click

Properties

• Select the

TCP/IP

option.

• Click

Properties

• Check the box

Obtain an IP address automatically

You are now ready to configure the Intel® Wireless Gateway through a wireless client. This

process varies slightly from that of a wired client. When using the Web Management Tool from a

wireless client, it is especially important that you follow the Setup Wizard as directed in the next

section.

After completing the configuration process, the guide instructs you to save the settings and restart

the Intel® Wireless Gateway. After doing so, go back to the wireless adapter and change the

settings to match the Intel® Wireless Gateway. If you attempt to configure the Intel® Wireless

Gateway and do not complete the process, it is sometimes difficult to configure the wireless

adapter so that it communicates with the Intel® Wireless Gateway again.