User's Manual
Table Of Contents
- 1.0 General Device Overview
- 2.0 Basic Operating Information
- 3.0 eUniStone Interfaces
- 4.0 General Device Capabilities
- 5.0 Bluetooth Capabilities
- 6.0 Electrical Characteristics
- 7.0 Package Information
- 8.0 Bluetooth Qualification and Regulatory Certification
- 8.1 Reference Design
- 8.2 FCC Class B Digital Devices Regulatory Notice
- 8.3 FCC Wireless Notice
- 8.4 FCC Interference Statement
- 8.5 FCC Identifier
- 8.6 European R&TTE Declaration of Conformity
- 8.7 Bluetooth Qualified Design ID
- 8.8 Industry Canada Certification
- 8.9 Label Design of the Host Product
- 8.10 Regulatory Test House
- 9.0 Assembly Guidelines
- References
- Terminology
eUniStone
PBA 31309
General Device Overview
User’s Manual Intel Public 8
Hardware Description Revision 1.0, 1-Feb-2013
1.0 General Device Overview
1.1 Features
General
• Complete Bluetooth 2.1 + EDR solution
• Implements a single point-to-point data link to other SPP capable
Bluetooth devices
• Ultra low power design in 0.13 µm CMOS
• Temperature range from -40°C to +85°C
• Integrates ARM7TDMI, RAM and patchable ROM
• On-module voltage regulators. External supply 2.9 - 4.1 V
• On-module EEPROM with configuration data
• On-module tuned reference clock
• Module can enter low power mode in idle state and during sniff intervals
Interfaces
• AT command interface over UART with HW flow control
• Default UART baudrate 115200 bit/s
• Module configuration reprogrammable for 9600 bit/s up to 3.25 Mbit/s UART
baudrate
• JTAG for boundary scan in production test
RF
• Class 2 device up to +4 dBm
• Receiver sensitivity typ. -86 dBm
• Integrated antenna, balun and ISM band filter
• Integrated LNA with excellent blocking and intermodulation performance
• Digital demodulation for optimum sensitivity and co-/adjacent channel performance