User's Manual

eUniStone
PBA 31309
Electrical Characteristics
User’s Manual Intel Public 23
Hardware Description Revision 1.0, 1-Feb-2013
6.3 DC Characteristics
6.3.1 Pad Driver and Input Stages
For more information, see Chapter 1.4.
Table 6. Internal1 (1.5 V) Supplied Pins
Parameter Symbol Values Unit Note / Test Condition
Min. Typ. Max.
Input low voltage -0.3 – 0.27 V –
Input high voltage 1.15 – 3.6 V –
Output low voltage – – 0.25 V IOL = 1 mA
Output high voltage 1.1 – – V IOH = -1 mA
Continuous Load
1
1. The total continuous load for all Internal1 supplied pins shall not exceed 2 mA at the same time
––1mA–
Pin Capacitance – – 10 pF –
Magnitude Pin Leakage – 0.01 1 µA Input and output drivers
disabled
Table 7. Internal2 (2.5 V) Supplied Pins
Parameter Symbol Values Unit Note / Test Condition
Min. Typ. Max.
Input low voltage -0.3 – 0.45 V –
Input high voltage 1.93 – 2.8 V P0.10
Input high voltage 1.93 – 3.6 V Other pins
Output low voltage – – 0.25 V IOL = 5 mA
Output low voltage – – 0.15 V IOL = 2 mA
Output high voltage 2.0 – – V IOH = -5 mA
Output high voltage 2.1 – – V IOH = -2 mA
Continuous Load
1
1. The total continuous load for all Internal2 supplied pins shall not exceed 35 mA at the same time
––5mA–
Pin Capacitance – – 10 pF –
Magnitude Pin Leakage – 0.01 1 µA Input and output drivers
disabled