User's Manual

9.
Align the contact edge of the new Wireless WAN Card with the corresponding socket contact of the
computer.
10.
Pivot the card until you can snap it into place by pressing the upper side of the connectors; then secure
the card with the two screws. Reattach the antenna if it is present, and connect the cables to the new
card.
Note:
Depending on the system configuration of your computer, the card may have only one
connector.
11.
Reinstall the palm rest
.
12.
Store the Tablet Digitizer Pen back in its slot
.
13.
Reinstall the keyboard
.
14.
Reinstall the battery
.
15.
Turn the computer over again. Connect the ac adapter and cables to the computer; then turn it on.
2/2 ページReplacing the PCI Express Mini Card for wireless WAN connection
2007/03/19file://C:\TamaTemp\replwan.htm\replwan.htm