User's Manual
To reinstall the palm rest, do as follows:
1.
Reinstall the palm rest by aligning the latches
(1)
, and pushing down on the front and sides (where the
latches are)
(2)
of the palm rest.
2.
Close the computer display, and turn the computer over.
3.
First reinstall the short screw marked
(A)
, and then reinstall six screws marked
(C)
.
4.
Store the Tablet Digitizer Pen back in its slot
.
5.
Reinstall the keyboard
.
6.
Reinstall the battery
.
7.
Turn the computer over again. Connect the ac adapter and cables to the computer; then turn it on.
2/2 ページReplacing the palm rest
2007/03/19file://C:\TamaTemp\replpalm.htm\replpalm.htm