User's Manual

connec
t
ors comes w
ith
th
e compu
t
er.
T
o rep
l
ace
th
e car
d
f
or
th
e
MIMO
f
ea
t
ure,
d
o as
f
o
ll
ows:
1.
Turn off the computer; then disconnect the ac adapter and all cables from the computer. Wait for a few
minutes, till the inside of the computer cools, before you start the following procedures.
2.
Close the computer display, and turn the computer over.
3.
Remove the battery
.
4.
Remove the Tablet Digitizer Pen
.
5.
Remove the keyboard
.
6.
Remove the palm rest
.
7.
If a tool for removing connectors is included in the package with the new card, use it to disconnect the
cables from the card. If no such tool is included, disconnect the cables from the card by picking up the
connectors with your fingers and gently unplugging them.
8.
Remove the screws
(1)
. The card pops up
(2)
. Remove the card.
Note:
If there is a spacer under the screw, remove it before installing a new card.
9.
If the new PCI Express Mini Card has three connectors, skip this step. If the new PCI Express Mini
Card has two connectors, first insert the connector end of the white cable in the plastic cable bag and
affix the cable to the mainboard with tape.
10.
Align the contact edge of the new card with the corresponding socket contact of the computer.
11.
Pivot the card until you can snap it into place by pressing the upper side of the connectors; then secure
the card with the two screws.
3/4 ページInstalling and replacing the PCI Express Mini Card for wireless LAN connection
2007/03/19file://C:\TamaTemp\replpci.htm\replpci.htm