User's Manual

8.
Remove the screws
(1)
. The card pops up
(2)
. Remove the card.
Note:
If there is a spacer under the screw, remove it before installing a new card.
9.
Align the contact edge of the PCI Express Mini Card with the corresponding socket contact of the
computer.
10.
Pivot the card until you can snap it into place by pressing the upper side of the connectors; then secure
the card with the two screws.
Make sure that the card is firmly fixed in the slot and does not move easily.
11.
Connect the cables to the new PCI Express Mini Card.
Note:
If the new PCI Express Mini Card has three connectors, as in the next drawing, you must
attach the cables to the right and left connectors. If you attach either cable to the center connector, the
connection speed will be lower.
12.
Reinstall the palm rest
.
13.
Store the Tablet Digitizer Pen back in its slot
.
14.
Reinstall the keyboard
.
15.
Reinstall the battery
.
16.
Turn the computer over again. Connect the ac adapter and cables to the computer; then turn it on.
2/4 ページInstalling and replacing the PCI Express Mini Card for wireless LAN connection
2007/03/19file://C:\TamaTemp\replpci.htm\replpci.htm