User's Manual

Before you start, print these instructions.
To replace the PCI Express Mini Card or the Modem Daughter Card, you need to remove the keyboard and
then the palm rest.
Danger:
During electrical storms, do not connect the cable to or disconnect it from the telephone
outlet on the wall.
Danger:
Electric current from power, telephone, and communication cables is hazardous. To avoid
shock hazard, disconnect the cables before opening the cover of this slot.
To remove the palm rest, do as follows:
1.
Turn off the computer; then disconnect the ac adapter and all cables from the computer. Wait for a few
minutes, till the inside of the computer cools, before you start the following procedures.
2.
Remove the battery
.
3.
Remove the Tablet Digitizer Pen
.
4.
Remove the keyboard
.
5.
Close the computer display, and turn the computer over.
6.
First remove the short screw marked
(A)
, and then remove the six screws marked
(C)
.
7.
Turn the computer over and open the display. Lift up to release the left edge of the palm rest
(1)
.
8.
Gently lift the right front side of the palm rest
(2)
to release the latch on the right top edge, and then
release the palm rest from the computer.
Replacing the palm rest
1/2 ページReplacing the palm rest
2007/03/19file://C:\TamaTemp\replpalm.htm\replpalm.htm