User's Manual




RevisionHistory
Rev.1.0,September‐2012 48/60
HardwareUserGuide,DocumentNumber:N/A
SwitchingUPCfromPPC(SUW)toDAU
InordertoletthescenariousetheUPC(=UplaneControl)onthe
DAU(andnotasperdefaultonthePPC),twoXMLfileshaveto
bereplacedinthetopology:
 sequencer.xml,

pipe.xml
CopythesetwofilestoC:\Rohde‐
Schwarz\Scenarios\16.6\APPL\MLAPI\rstopology\LTE\.
NOTE:
Itisrecommendedtomakeaback‐upoftheoriginalfilesbefore.
StarttheLTEscenario
StarttheLTEscenarionow.
DuringtheDefaultEPSBearerSetuptheUEwillgetanIPaddress
whichwasacquiredbytheDAUbefore.