User's Manual




RevisionHistory
Rev.1.0,September‐2012 29/60
HardwareUserGuide,DocumentNumber:N/A
drivers,seeSubsec.2.1.1,(flashtoolsubfolder)andfollowthe
instructionsfromtheinstallationwizards.
Note:
Ifthisdriversarenotinstalledcorrectlyinstabilitiesat
theflashprocessareoccurringwithout substantialerror
informationfromWinXPorWin7.
2.1.5 ProlificSerialtoUSBDriver
TheProlificdriverismandatorytoaccessallmodemboardUART
(USIF)ports.Taketherecommendeddriver,seeSubsec.2.1.1,
(folderProlificDriver)andfollowtheinstructionsfromthe
installationwizard.
ConnecttheUSBcabletothedesiredUSIFportandcheckthatthe
COMportappearscorrectlyintheWin
devicemanager.
(Win:Settings:ControlPanel:SystemProperties:Hardware:Device
Manager.ThisisquitesimilartofindatWinXPandWin7.)