User's Manual




RevisionHistory
Rev.1.0,September‐2012 14/60
HardwareUserGuide,DocumentNumber:N/A
M:\Software\XMM7060_toolsatIMCDRS
FlashTool:
\\musdsara001.imu.imc.local\SW_builds\xmm6360\tools\flashtool
Socmondll:
\\musdsara001.imu.imc.local\SW_builds\xmm7060\Release\Tools\Socmondll\socmondll_100.150.001.dll
2.1.2 IntelHighSpeedModemDriver(ecm200)
 Taketherecommendeddriver,seeSubsec.2.1.1,
(foldere.g.WMC_ecm200_3.61.0)andfollowthe
instructionsfromtheinstallationwizard.

EnabletheIPforwarding:runthe
sriptenable_ip_forwarding.regfrom:
\\musdsara001.imu.imc.local\SW_builds\xmm7060\Release\Tools\Intel_High_Speed_Modem
Hint:CopythefiletothelocalPCandthenrunitwithroot
privileges.
NowconnectthecabletotheUSB‐HSconnector.